Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
rear panel are numbered as 1, 2, 3, etc., connections can l Be sure that the connections from the left (“L”) and right be made easily by making sure to connect the LINE OUT (“R”) LINE OUT terminals are connected to the terminals of this unit to the input terminals of the amplifier corresponding (left and right) input terminals of the amplifier numbered 2. or other component. TUNER L R l6 20 28 40 60 l2 8 4 2 0 –dB Amplifier Connection cord (included) This unit (Europe model) 75W UNBAL. FM ANT GND AM ANT LINE OUT R L 2 To AC outlet NOTES ABOUT CONTROLLING THIS UNIT WITH THE REMOTE CONTROL TRANSMITTER This unit has a remote control sensor. It receives signals from a remote control transmitter provided with a YAMAHA amplifier or receiver. 30° 30° Remote control sensor Within approximately 6 m (19.7 feet) Parts in shaded area ) are present on TX-492RDS only. * ( Notes . There should be no large obstacles between the remote control transmitter and the main unit. . If the remote control sensor is directly illuminated by strong lighting (especially an inverter type of fluorescent lamp etc.), it might cause the remote control transmitter not to work correctly. In this case, reposition the main unit to avoid direct lighting. English CONTROLS AND THEIR FUNCTIONS FRONT PANEL 1 234 5 TUNING DOWN UP PTY SELECTOR FM/AM TX-492RDS TX-492* Parts in shaded area ( ) are present on TX-492RDS only. 6 1 POWER switch Press this switch to switch the power on. Press it again to switch the power off. 2 Display panel Shows station frequencies and various information. (Refer to the next page for details.) 3 Remote control sensor Receives signals from a remote control transmitter provided with a YAMAHA amplifier or receiver. 4 PRESET STATIONS buttons Select a preset station number (1 to 8). 5 TUNING DOWN and UP buttons Used for tuning. Press the “UP” button to tune in to higher frequencies, and press the “DOWN” button to tune in to lower frequencies. PTY SELECTOR buttons TX-492RDS only When this unit is in the PTY SEEK mode, pressing these buttons changes the currently selected program type. 6 RDS MODE/FREQ button TX-492RDS only When an RDS station is received, pressing this button changes the display mode into the PS mode, PTY mode, RT mode and/or CT mode (if the station employs those RDS data services), and frequency display in turn. 7 PTY SEEK MODE button TX-492RDS only When this button is pressed, the unit turns into the PTY SEEK mode. 8 PTY SEEK START button TX-492RDS only Press this button to begin searching for a station after the desired program type is selected in the PTY SEEK mode. 7890A B D CC 9 EON button TX-492RDS only Press this button to select a desired program type (NEWS, INFO, AFFAIRS, SPORT) when you want to call a radio program of that program type automatically. 0 A/B/C/D/E button Press this button to select a desired group (A–E) of preset stations. A MEMORY (MAN’L/AUTO FM) button When this button is pressed, the MEMO indicator flashes for about 5 seconds. During this period, press the desired PRESET STATIONS button to enter the displayed station into the memory. When this button is pressed and held for about 3 seconds, the automatic preset tuning begins. (Refer to page 11 for details.) B EDIT button This button is used to exchange the places of two preset stations with each other. C FM/MW/LW button TX-492RDS Press this button to switch the reception band to FM, MW or LW. FM/AM button TX-492 Press this button to switch the reception band to FM or AM. D TUNING MODE (AUTO/MAN’L MONO) button Press this button to switch the tuning mode to automatic or manual. To select the automatic tuning mode, press this button so that “AUTO” lights up on the display. To select the manual tuning mode, press this button so that “AUTO” goes off. DISPLAY PANEL MEMO PS PTY RT CT EON NEWS INFO AFFAIRS SPORT PTY HOLD EDIT 12453 6 7 * Parts in shaded area ( ) are present on TX-492RDS only. 1 Preset station indicator Display the group (A/B/C/D/E) and the number (1 to 8) of a preset station. 2 Station frequency display Displays the band and frequency or information from the received station. 3 AUTO indicator Lights up when this unit is in the automatic tuning mode. 4 ST (STEREO) indicator Lights up when an FM stereo broadcast with sufficient signal strength is received. 5 Signal-level meter Indicates the signal level of the received station. If multipath interference is detected, the indication decreases. 6 MEMO indicator When the MEMORY button is pressed, this indicator flashes for about 5 seconds. During this period, the displayed station can be programmed to the memory by using the A/B/C/D/E button and one of the PRESET STATIONS buttons. 89 0A 7 RDS mode indicators TX-492RDS only The name(s) of RDS mode(s) employed by the currently received RDS station light(s) up. Illumination of the indicator on the head of a name shows that the corresponding RDS mode is now selected. 8 EON indicator TX-492RDS only Lights up when an RDS station that empl...