Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Note Once DAB Clear is performed, the deleted information and preset settings cannot be restored. 1 Select “DAB Clear” in the DAB function menu. 2 Press B/ C to select “OK” and then press E or ENTER. After DAB Clear is complete, the Autoscan Full function starts automatically (see page 6). y To cancel the operation, select “CANCEL”. ¦ Auto Power Down This unit automatically enters standby mode if it is not operated for specified amount of time. This setting is effective for all tuning modes. 1 Select “Auto Power Down” in the DAB function menu. 2 Press B/ C to select the desired auto power down setting and then press E or ENTER. Choice Description OFF This unit will not be set to standby mode automatically. 4 Hours, This unit is set to standby mode automatically after the specified 8 Hours, amount of time passes. 12 Hours Default setting is “8 Hours”. y While pressing B/ C to select the desired setting, “*” is displayed next to the current setting. OPERATIONS English 9 En DAB TUNING DAB station information Use this feature to display various information about the current DAB station. INFO/TEXT INFO/TEXT 1 Tune into the desired DAB station. 2 Press INFO/TEXT repeatedly to display information about the current DAB station. DLS (Dynamic Label Segment) Displays information about the current DAB station, such as the name of the song, artist and speaker, etc. This data is continuously updated by the DAB broadcaster, thus changing often with every new song or program. Other data, such as news, weather, and sports headlines, may be broadcast as well. Audio mode Displays bit rate and digital radio format (DAB or DAB+). Program type Displays the genre of the current DAB station. Ensemble label Displays the name of the current ensemble. Date & time Displays the current date and time. Channel & frequency Displays the channel label and frequency of the current DAB station (See page 10). Signal quality Displays the signal reception quality (from 0 (none) to 100 (best)) of the current DAB station. y The front panel display can display up to 16 alphanumeric characters at once. The dynamic label segment scrolls in a continuous manner. DAB frequency information ¦ Band III Note When you perform the local range scanning, this unit scans only within the frequencies marked with an asterisk (*) in the following table (see page 6). Frequency Channel label Frequency Channel label 174.928 MHz 5A * 208.064 MHz 9D 176.640 MHz 5B * 209.936 MHz 10A 178.352 MHz 5C * 211.648 MHz 10B 180.064 MHz 5D * 213.360 MHz 10C 181.936 MHz 6A * 215.072 MHz 10D 183.648 MHz 6B * 216.928 MHz 11A 185.360 MHz 6C * 218.640 MHz 11B 187.072 MHz 6D * 220.352 MHz 11C 188.928 MHz 7A * 222.064 MHz 11D 190.640 MHz 7B * 223.936 MHz 12A 192.352 MHz 7C * 225.648 MHz 12B 194.064 MHz 7D * 227.360 MHz 12C 195.936 MHz 8A * 229.072 MHz 12D 197.648 MHz 8B * 230.784 MHz 13A 199.360 MHz 8C * 232.496 MHz 13B 201.072 MHz 8D * 234.208 MHz 13C * 202.928 MHz 9A * 235.776 MHz 13D * 204.640 MHz 9B * 237.488 MHz 13E * 206.352 MHz 9C * 239.200 MHz 13F ¦ L Band Frequency Channel label Frequency Channel label 1452.960 MHz LA 1473.504 MHz LM 1454.672 MHz LB 1475.216 MHz LN 1456.384 MHz LC 1476.928 MHz LO 1458.096 MHz LD 1478.640 MHz LP 1459.808 MHz LE 1480.352 MHz LQ 1461.520 MHz LF 1482.064 MHz LR 1463.232 MHz LG 1483.776 MHz LS 1464.944 MHz LH 1485.488 MHz LT 1466.656 MHz LI 1487.200 MHz LU 1468.368 MHz LJ 1488.912 MHz LV 1470.080 MHz LK 1490.624 MHz LW 1471.792 MHz LL 10 En FM/AM TUNING FM/AM TUNING Automatic and manual tuning FM MODE BAND TUNING MODE PRESET/ TUNING FM MODE TUNING H/ I BAND ¦ Automatic tuning Automatic tuning is effective when station signals are strong and there is no interference. 1 Press BAND repeatedly to select FM or AM as the reception band. 2 Press and hold TUNING H/ Ifor more than 2 seconds to begin automatic tuning. When this unit is tuned into a station, the TUNED indicator lights up and the frequency of the station is displayed on the front panel display. y • On the front panel, press TUNING MODE repeatedly to select “Auto tune” and then rotate PRESET/TUNING. • If the station provides Radio Data System information, the program service information will be displayed on the front panel display (see page 13). ¦ Manual tuning If the signal from the station you want to select is weak, tune into it manually. 1 Press BAND repeatedly to select FM or AM as the reception band. 2 Press TUNING H/ I to select the desired frequency. When this unit is tuned into a station, the TUNED indicator lights up. y On the front panel, press TUNING MODE repeatedly to select “Manual tune” and then rotate PRESET/TUNING. ¦ Improving FM reception If the signal from the station is weak and the sound quality is not good, set the FM radio wave reception mode to the monaural tuning mode to improve reception. Press FM MODE repeatedly to select “AUTO STEREO” (stereo mode) or “MONO” (monaural mode) when this unit is tuned into an FM radio station. • When this unit is in the stereo tuning mode, ...