Оценок - 5, средний балл: 4.4
(
)
)
|
Фото и характеристики Samsung HW-E450 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The ARC function is activated in D.IN mode if the unit is connected to an ARC supporting TV. To turn off the ARC function, turn Anynet off. Use the provided cable if the USB flash memory is not available directly in the unit. • • • • . .. POWER TV POWER AH59-02434A SAT MUTE SMART VOLUME S/W LEVEL AUDIO SYNC SAT SOURCE SOUND SPEAKER DIMMER AUTO POWER TV INFOTV SOURCE TV VOL TV VOL TV CH TV CH TV PRE-CH TV EXIT DRCREPEAT 3D SOUND VOLUME EFFECT TV MUTE POWER TV POWER AH59-02434A SAT MUTE SMART VOLUME S/W LEVEL AUDIO SYNC SAT SOURCE SOUND SPEAKER DIMMER AUTO POWER TV INFOTV SOURCE TV VOL TV VOL TV CH TV CH TV PRE-CH TV EXIT DRCREPEAT 3D SOUND VOLUME EFFECT TV MUTE USIng BlUetOOtH You can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires! What is Bluetooth? Bluetooth is a technology that enables Bluetooth-compliant devices to easily interconnect with each other using a short wireless connection. • A Bluetooth device may cause noise or malfunction, depending on usage, when: -A part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Air Track. -It is subject to electrical variation from obstructions caused by a wall, corner or office partitioning. - It is exposed to electrical interference from same frequency-band devices including medical equipment, microwave ovens and wireless LANs. • Pair the Air Track with the Bluetooth device while maintaining a close distance. • The further the distance is between Air Track and Bluetooth device, the worse the quality is. If the distance exceeds the Bluetooth operational range, the connection is lost. • In poor reception-sensitivity areas, the Bluetooth connection may not work properly. • The Air Track has an effective reception range of up to 10 meters in all directions if there are no obstacles. The connection will be automatically cut off if the distance is out of this range. Even within this range, the sound quality may be degraded by obstacles such as walls or doors. • This wireless device may cause electric interference during its operation. 17 EnG . functions To connect the Air Track to a Bluetooth device Check if the Bluetooth device supports the Bluetooth compliant stereo headset function. 1. Press the FUNCTI ON button on the remote control of AirTrack to display the BT message. You will see WAIT for 4 seconds and then REA DY on the front display of the Air Track. 2. Select the Bluetooth menu on the Bluetooth device you want to connect. (refer to the Bluetooth device's user manual) 3. Select the Stereo headset menu on the Bluetooth device. You will see a list of scanned devices. 4. Select "Samsung Home Audio" from the searched list. When the Air Track is connected to the Bluetooth device, the device name of the connected Bluetooth device, followed by Air Track will display CONN on the front display. If the Bluetooth device has failed to be paired with Air Track, delete the previous “SAMSUNG HOME AUDIO” found by the Bluetooth device and make it search for Air Track again. 5. Play music on the connected device. You can listen to the music playing on the connected Bluetooth device over the Crystal Surround Air Track system. In BT mode, Play/Repeat/Stop/Next/Back functions are not available. You may be required to enter a PIN code (password) when connecting the Bluetooth device to the Air Track. If the PIN code input window appears, enter <0000>. The Air Track only supports Middle Quality SBC data (up to 237kbps@48kHz), and does not support High Quality SBC data (328kbps@44.1kHz). The AVRCP feature is not supported. Connect only to a Bluetooth device that supports the A2DP (AV) function. You cannot connect to a Bluetooth device that supports only the HF (Hands Free) function. Only one Bluetooth device can be paired at a time. Once you have turned off Air Track and the pairing is disconnected, the pairing will not be restored automatically. To reconnect, you must pair the device again. Search or connection may not be performed properly by Air Track in the following cases: If there is a strong electrical field around Air Track. If several Bluetooth devices are simultaneously paired with AirTrack If the Bluetooth device is turned off, not in place, or malfunctions Note that such devices as microwave ovens, wireless LAN adaptors, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, which can cause electric interference. • • • • • • . . .. . .. . - - - - Connect Bluetooth device 18 To disconnect the Bluetooth device from Air Track You can disconnect the Bluetooth device from Air Track. For instructions, see the Bluetooth device's user manual. Air Track will be disconnected. When Air Track is disconnected from the Bluetooth device, Air Track will display DISC ON on the front display. To disconnect Air Track from the Bluetooth device Press the ( ) button on the front panel of Air Track to switch from BT to another mode or turn off Air Track. The connected Blue...