Connecting external devices via HDMI To play digital contents through the HDMI connection, both of the connected external device and TV must support High-bandwidth Digital Content Protection System (HDCP). This product supports HDCP. High-bandwidth Digital Content Protection System (HDCP) support • Audio from SACD discs will not be played. To play a DVD disk whose copyright is protected by CPPM, use a player supporting CPPM. • The quality of the audio output through the HDMI jack (sampling frequency and bit rate) may be limited by the performance of the connected device. • Since HDMI connection supports both video and audio, you don’t have to connect an additional audio cable. DVD or Blu-RAY Player TV SAT(Cable/Satellite/Set-top box) CONNECTIONS DVD/Blu-RAY or 7.1 channel player TV A TV with an HDMI jack. A TV with a DVI-D jack (TV supporting HDCP) A TV with a DVI-D jack (TV not supporting HDCP) COMPATIBILITY WITH A TV SUPPORTING HDMI Video/Audio Video - • Connect it if you want to use Anynet+. • If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the AV receiver using the TV’s remote control. This function is available only in connection with Samsung TV and DVD player supporting Anynet +(HDMI-CEC). • Please check the logo. If your TV has an logo, then it supports the Anynet+ function. 16 17 GB CONNECTIONS 1. Connect the FM antenna supplied to the FM 75. COAXIAL terminal as a temporary measure. 2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface. Connecting the FM antenna FM antenna connection FM antenna (supplied) Camcorder Connecting AUX components Connecting external devices (Cont'd) You can connect external devices you use (camcorder, game console, mobile equipment,etc.) to the front of this unit for Connect the AV receiver to a Samsung TV with an HDMI cable. (See page 15) convenience. Set the Anynet+ function on your TV. (See the TV instruction manual for more information.) • You can operate the AV receiver by using the TV remote control. (Available TV button : VOLUME , button.) 12 Using Anynet+(HDMI-CEC) Set the Anynet+(HDMI-CEC) function to on your TV. • Receiver : On : You can listen to audio through the AV Receiver. • Receiver : Off : You can listen to audio through the TV. Select THEATER to connector and set the option of each items below. • View TV : If Anynet+(HDMI-CEC) set to on and you select View TV, the AV receiver will automatically switch to SAT OPTIC2(DIGITAL IN). • Receiver : On : You can listen to audio through the AV receiver. • Receiver : Off : You can listen to audio through the TV. 1 Press SETUP/MENU button, and then press the ENTER button. • “SETUP MODE” appears on the display and goes into Setup Mode. 2 Press oe v button to select the “ANYNET+ MODE”, and then press the ENTER button. 3 Press the …† button to set ANYNET+ to OFF. - If you are using Anynet+, set ANYNET+ to ON and if not, set it to OFF. MOVE ENTER EXIT MOVE ENTER EXIT If you select TV If you select the DVD Player To turn off Anynet+ With Anynet+ You can operate this unit, power on your TV, or watch a movie by pressing the Play button on your Samsung TV's remote control. MOVE ENTER EXIT Anynet+ • When selecting View TV, you must have a digital optical cable connected from the TV to the AV receiver to listen to the TV sound through the AV receiver. • When you are making Anynet+ connection, do not connect more than two AV receivers Caution (Anynet+ installed). Otherwise, it can cause a malfunction. To exit setup mode • Wait for about 5 seconds or press SETUP button. “SETUP OFF” appears on the display and Setup Mode is exited. 19 GB 18 To select a function Method 1 Method 2 Press the FUNCTION button. • Each time you press this button, FM.7. 1 MULTI CH.CD.DVD .SAT.VCR.AUX will be selected in turn. Press CD, VCR, DVD, 7.1CH, SAT, AUX or TUNER button. • You can directly select the desired function. OPERATION Remote control functions You can operate your AMP (this AV receiver), TV, DVD and VCR with this remote control. See pages 43-46 for more details. Connect the power plug to the outlet. Press the POWER button of the remote control. • This unit will be turned on or set to Standby mode. Before using the AV receiver Turning On/Off Selecting digital/analogue Input You can listen to sound in 2 channel analog , Dolby Digital or DTS using this unit. REMOTE CONTROL or MAIN UNIT • You can change the digital input setting for DVD, SAT and CD functions in the “DIGITAL IN” setup. (See page 23) • You can enjoy Dolby Digital or DTS if you connect the digital audio output jack of an external audio component to the optical or coaxial digital audio input jack on the main unit. For DVD/SAT function Press the INPUT MODE button. • Each time you press this button, input mode changes as follows: For CD function Press the INPUT MODE button. • Each time the button is pressed, input mode changes as follows: v v v v v 21 GB 20 P...
)
