Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To Exit Setup Mode • Wait for about 5 seconds or turn the VOLUME CONTROL of the main unit. “SETUP MODE OFF” appears on the display and exits Setup Mode. v • STD : Sets DRC effect to standard. • You can only set this function via the main unit. • MAX : Sets DRC effect to maximum. • MIN : Sets DRC effect to minimum. Setting DRC MAIN UNIT 1 2 3 21 GB • F.L (Front-Left) : -10 ~ +10dB • CEN (Center) : -10 ~ +10dB • F.R (Front-Right) : -10 ~ +10dB • S.R (Surround-Right) : -10 ~ +10dB • S.B (Surround Center): -10 ~ +10dB • S.L (Surround-Left): -10 ~ +10dB • S.W (Subwoofer): -10 ~ +10dB 24 Test Tone Output Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 5 times. • “TEST-T MANU” appears in the display. Press SURROUND button. • Each time you press this button, F.L .CEN .F.R .S.R .S.B .S.L .S.W will be selected in turn. Press SELECT( )button to set the test tone as you want. • You can adjust the speaker output level from -10 to +10dB by 1 step. v To Manually Output Test Tone MAIN UNIT 1 2 4 3 To Stop Test Tone Method 1) Press INPUT button 1 time. • “TEST-T OFF” appears on the display and test signal stops. Method 2) Turn VOLUME CONTROL. • “SETUP MODE OFF” appears on the display and test tone stops. , OPERATION 23 Test Tone Use test tone to check speaker connection status or level. Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 4 times. • “TEST-T AUTO” appears in the display. Press SURROUND button. • Test signal will be automatically output as follows; F.L .CEN .F.R .S.R .S.B .S.L .S.W . • During test signal output, press SELECT ( ) button to adjust the speaker output level from -10 to +10 dB by 1 step. v To Automatically Output Test Tone MAIN UNIT 1 2 3 To Stop Test Tone Method 1) Press INPUT button 2 times. • “TEST-T OFF” appears on the display and test tone stops. Method 2) Turn VOLUME CONTROL. • “SETUP MODE OFF” appears on the display and test tone stops. , GB • F.L (Front-Left) : -10 ~ +10dB • CEN (Center) : -10 ~ +10dB • F.R (Front-Right) : -10 ~ +10dB • S.R (Surround-Right) : -10 ~ +10dB • S.B (Surround Center): -10 ~ +10dB • S.L (Surround-Left): -10 ~ +10dB • S.W (Subwoofer): -10 ~ +10dB To Exit Setup Mode • Wait for about 5 seconds or turn VOLUME CONTROL of the main unit. “SETUP MODE OFF” appears on the display and exits Setup Menu. 26 Press SETUP button. • “SETUP MODE” appears on the display and enters into Setup Mode. Press INPUT button 7 times. • “LEVEL SETUP” appears on the display. Press SURROUND button. • Each time you press this button, F.L .CEN .F.R .S.R .S.B .S.L .S.W will be selected in turn. Press SELECT( ) button to set to the speaker level you want. • You can adjust it from -10 to +10dB by 1 step. • The sound gets smaller at -10dB and louder at +10dB. • Default setting value is 00dB Setting Speaker Level MAIN UNIT 1 2 4 3 , OPERATION Setting Speaker Level You can set the balance and level of speakers Press SPK LEVEL button to select the speaker you want. • Each time you press this button, F.L .CEN .F.R .S.R .S.B .S.L .S.W . SPK LEVEL OFF will be selected in turn. Press …† button to set the speaker level you want. • You can adjust it from -10 to +10dB by 1 step. • The sound gets quieter at -10dB and louder at +10dB. • Default setting value is 00dB. To Exit Setup Mode • Wait for about 5 seconds or press SPK LEVEL button on the remote control to select SPKLEVEL OFF. 25 v Remote Control 1 2 GB • MUSIC : Provides 5.1 Channel Surround sound to digital, analog or existing stereo sources such as CD, TAPE, FM, TV and Stereo VCR. • CINEMA : Adds realism to the movie soundtrack. • MATRIX : You will hear 5.1 Channel Surround sound. • GAME : Enhances the excitement of the game's sound. • PROLOGIC : You will experience a surround effect with just the front left and right speakers. 28 Press SURROUND button briefly to select “DPL llx” Mode. • Each time you press this button, DPL ll x .NEO:6 .SFE .STEREO will be selected in turn. Press SELECT( ) button. • Each time you press SELECT ( ) button, MUSIC .CINEMA .MATRIX . GAME .PROLOGIC will be selected in turn. • Each time you press SELECT ( ) button, PROLOGIC .GAME .MATRIX .CINEMA .MUSIC will be selected in turn. Dolby Pro Logic ll x Mode • You cannot use Dolby Pro Logic ll x Mode for multi channel signals such as Dolby Digital and DTS. • Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. • Sound will not be output from rear center speaker if PCM audio signal is mono. To Exit Setup Mode • Wait for about 5 seconds. MAIN UNIT 1 2 , OPERATION Dolby Pro Logic llx Mode This mode provides 5.1 channel sound from 2 channel sources Press MODE button. • Each time you press this button, MUSIC . CINEMA . MATRIX . GAME . PROLOGIC will be selected in turn. 27 To Exit Setup Mode • Wait for about 5 seconds. REMOTE CONTROL 1 GB • C-WIDTH : This sets the width of the center image. The higher the setting, the less sound comes fro...
Эта инструкция также подходит к моделям:Ресиверы и усилители - AV-R601 (7.92 mb)