Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If the power supply of the receiver is not turned on, neither video nor audio signals will be transmitted. Initializing the receiver Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to revert back to the factory default settings. Be sure to use the buttons on the receiver to perform this operation. 1/1 r-------------------i ^ « io-- — oO (b) (rn)mmvm) i i-1 i 1 Press 1/1 to turn off the receiver. 2 Hold down 1/1 for 5 seconds. The “CLEARING” appears on the display panel for a while, then changes to “CLEARED !”. Changes or adjustments made to the settings are now reset to the defaults. 36BB Setting the speakers 4 Press v/v repeatedly to select “SP Pattern”, then press 0 or b. Selecting the speaker pattern Select the speaker pattern according to the speaker system which you are using. 1 Press MENU. The menu is displayed on the TV screen. BD/DVD """ GAME n SAT/CATV Musk; VIDEO 1 1=1 VldBO VIDEO 2 T 2 Press v/v repeatedly to select “» Settings”, then press 0 or b. The Settings menu list appears on the TV screen. | Auto CaJ. Speaker Surround ■s. EQ Sntlkiga Audio ▼ 3 Press v/v repeatedly to select “Speaker”, then press 0 or b. a Speaker Settings I SP Pattern SB Assign: Manual Setup Crossover Freq äSpeaker Pattern _ ! ° 1 0 D 0 1 3Í4.1 I rfiËûiwO 5 Press v/v repeatedly to select the speaker pattern you want, then press 0. 6 Press RETURN/EXIT O. Setting the surround back speakers You can switch the usage of the speaker(s) connected to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/FRONT B terminals in accordance with the intended use. Notes • This setting is only available if the “SP Pattern” is set to a setting without surround back and front high speakers. • Be sure to set the “SB Assign” before you perform Auto Calibration. 1 Press MENU. The menu is displayed on the TV screen. 2 Press v/v repeatedly to select “w Settings”, then press 0 or b. The Settings menu list appears on the TV screen. 3 Press v/v repeatedly to select “Speaker”, then press 0 or b. continued 37GB Preparing the Receiver 4 Press v/v repeatedly to select “SB Assign”, then press © or b. 5 Press v/v repeatedly to select the parameter you want, then press ©. • Speaker B: If you connect an additional front speaker system to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select “Speaker B”. • BI-AMP: If you connect front speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/BI-AMP/ FRONT B terminals using a biamplifier connection, select “BI-AMP”. • OFF: If you connect surround back or front high speakers to the SPEAKERS SURROUND BACK/FRONT HIGH/ BI-AMP/FRONT B terminals, select “OFF”. 6 Press RETURN/EXIT O. You can select the front speakers you want to drive. Be sure to use the buttons on the receiver to perform this operation. SPEAKERS © o ° ° — © O (0) (®)B (1®)#«) Press SPEAKERS repeatedly to select the front speaker system you want to drive. You can confirm the selected speakers terminals by checking the indicator on the display panel. Indicators Selected speakers SP A The speaker connected to the SPEAKER FRONT A terminals. SP B* The speaker connected to the SPEAKER SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals. SP A B* The speaker connected to both the SPEAKER FRONT A and SPEAKER SURROUND BACK/ FRONT HIGH/BI-AMP/FRONT B terminals (parallel connection). “SPK OFF” appears on the display panel. No audio signals are output from any speaker terminals. * To select “SP B” or “SP A B”, set the “SB Assign” to “Speaker B” in the Speaker Settings menu (page 37). Note This setting is not available when headphones are connected. Using AUTO CALIBRATION This receiver is equipped with DCAC (Digital Cinema Auto Calibration) function which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver. • Adjust the speaker level. • Measure the distance of each speaker from your seating position.1) • Measure the speaker size.1) • Measure the frequency characteristics (EQ).1) • Measure the frequency characteristics (Phase).1)2) 1)The measurement result is not utilized when “A. DIRECT” is selected. 2)The measurement result is not utilized when Dolby TrueHD or DTS-HD signals with a sampling frequency of more than 48 kHz are being received. Selecting the front speaker 38BB The DCAC is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference. For details, see “Test Tone” (page 93). Setting up the Auto Calibration Before you perform Auto Calibration Before you perform Auto Calibration, check the following items. • Set up and connect the speakers (page 19, 21). • Connect only the supplied optimizer microphone to the AUTO CAL MIC jack. Do not connect any other microphones to this jack. • Set the “SB Ass...