Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации Sony, модель STR-DE697

Производитель: Sony
Размер: 1.57 mb
Название файла: 4252272312.pdf

Язык инструкции:en

Документ загружается, подождите пожалуйста
Документ загружается, подождите пожалуйста

Фрагмент инструкции


To index an input Press the input button to select the input you want to create an index name for. 2 Press MAIN MENU repeatedly to select “ CUSTOM ”. 3 Press or repeatedly to select “NAME IN”. 4 Press ENTER. The cursor flashes and you can select a character. 5 Use or and –/+ jog dial to create an index name. Turn the –/+ jog dial to select a character, then press > to move the cursor to the next position. Tips • You can select the character type as follows by turning the –/+ jog dial. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, turn the –/+ jog dial until a blank space appears in the display. • If you made a mistake, press < or > repeatedly until the character you want to change flashes, then turn the –/+ jog dial to select the correct character. 6 Press ENTER to store the index name. Note (Models of area code CEL, CEK only) When you name an RDS station and tune in the station, the Program Service name appears instead of the name you entered. (You cannot change the name of a Program Service name. The name you entered will be overwritten by the Program Service name.) Other Operations 39GB Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. Press SLEEP repeatedly while the power is on. Each time you press SLEEP, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF While using Sleep Timer, “SLEEP” lights up in the display. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled. Selecting the speaker system You can select the front speaker system you want to use. Press SPEAKERS (OFF/A/B/A+B) repeatedly to select the front speaker system you want to use. The selected speaker system appears in the display. To turn off the speaker output, press SPEAKERS (OFF/A/B/A+B) repeatedly until “SP A” and “SP B” indication turn off. The speaker system • SP A The speakers connected to the SPEAKERS FRONT A terminals. • SP B The speakers connected to the SPEAKERS FRONT B terminals. • SP A and SPB The speakers connected to both the SPEAKERS FRONT A and B terminals (parallel connection). 40GB Recording Before you begin, make sure you have connected all components properly. Recording on an audio tape or MiniDisc You can record on a cassette tape or MiniDisc using the receiver. See the operating instructions of your cassette deck or MD deck if you need help. 1 Select the component to be recorded. 2 Prepare the component for playing. For example, insert a CD into the CD player. 3 Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary. 4 Start recording on the recording deck, then start playback on the playback component. Notes • You cannot record a digital audio signal using a component connected to the analog MD/TAPE OUT jacks. To record a digital audio signal, connect a digital component to the DIGITAL OPTICAL MD/TAPE OUT jacks. • Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks. • The analog audio signals of the current input is output from the MD/TAPE OUT jacks. • The signals input to the MULTI CH IN jacks are not output from the MD/TAPE OUT jacks even when MULTI CH IN is being used. The analog audio signals of the current or previously used input are output. • Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the sources. Recording on a video tape You can record from a VCR, a TV or a DVD using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See the operating instructions of your VCR or DVD player if you need help. 1 Select the program source to be recorded. 2 Prepare the component for playing. For example, insert a video tape you want to record into VCR. 3 Insert a blank video tape into the VCR (VIDEO 1) for recording. 4 Start recording on the recording VCR, then start playing the video tape or DVD you want to record. Tip You can record the sound from any audio source onto a video tape while copying from a video tape or DVD. Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium. To resume audio recording from the original medium, select the video source again. Notes • You cannot record a digital audio signal using a component connected to the analog VIDEO 1 OUT jacks. • Make sure to make both digital and analog connections to the VIDEO 2 and DVD inputs. Analog recording is not possible if you make only digital connections. • The analog audio signals of the current input are output from the VIDEO 1 OUT jacks. • The signals input to the MULTI CH IN jacks are not output from VIDEO 1 OUT jacks even when MULTI CH IN ...

Эта инструкция также подходит к моделям:
- ()

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории