Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
DAT deck/ Tape deck D. SKIP/ Receiver Scans and selects preset CH/PRESET stations. +/TV/ VCR/ Selects preset channel. satellite tuner CD player/ Skips discs (multi-disc VCD player/ changer only). DVD player/ MD deck ./> VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Skip tracks. m/M CD player/ Search tracks (forward or VCD player/ backward) DVD player VCR/ Fastforwards or rewinds. LD player/ MD deck/ DAT deck/ Tape deck n Tape deck Starts play on the reverse side. N VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Starts play. Remote Operations Function Button X VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck x VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Pauses play or record. (Also start recording with components in record standby.) Stops play. DISPLAY TV/VCR, Selects information VCD player/ displayed on the TV LD player/ screen. DVD player ANT VCR Selects output signal TV/VTR from the aerial terminal: TV signal or VCR program. DISC CD player Select discs (multi-disc changer only). TITLE DVD player Displays DVD title. MENU DVD player Displays DVD menu. ENTER DVD player Enters the selection. RETURN DVD player Returns to previous menu or exits the menu. V/v/B/b DVD player Selects a menu item. . TV Selects the channel entry mode, either one or two digit continued Operations Using the Remote RM-U305C 51GB Remote button description (continued) Remote Operations Function Button POSITION**TV Changes the position of the small picture. SWAP** TV Swaps the small and the large picture. SUB CH TV Selects the preset +/–** channels for the small picture. P IN P** TV Activates the picture-inpicture function. JUMP TV Toggles between the previous and the current channels. WIDE TV Selects the wide picture mode. TV/VIDEO TV Selects input signal: TV input or video input. ** Only for Sony TVs with the picture-in-picture function. Notes • When you press the function buttons (VIDEO 1, VIDEO 2, VIDEO 3, DVD/LD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press the TV/ VIDEO button to switch the input mode of the TV. • Some functions explained in this section may not work depending on the model of the receiver. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • The TV/SAT and PHONO functions are not available for set operation. Changing the factory setting of a function button If the factory settings of the FUNCTION buttons do not match your system components, you can change them. For example, if you have an MD player and a tape deck and you don’t have a CD player, you can assign the CD/SACD button to your tape deck. Note that the settings of the TUNER and FN SHIFT functions (VIDEO 1, VIDEO 2, VIDEO 3, PHONO and MD/TAPE) button cannot be changed. 1 Hold down the Function button whose function you want to change (for example, CD/SACD). 2 Press the corresponding button of the component you want to assign to the Function button (for example, 4 – Tape deck). The following buttons are assigned to select the functions: To operate Press CD player 1 DAT deck 2 MD deck 3 Tape deck A 4 Tape deck B 5 LD player 6 VCR (command mode VTR 1*) 7 VCR (command mode VTR 2*) 8 VCR (command mode VTR 3*) 9 TV 0 DSS (Digital Satellite Receiver) >10 DVD ENTER VCD player . * Sony VCRs are operated with a VTR 1, 2 or 3 setting. These correspond to Beta, 8mm and VHS respectively. Now you can use the CD/SACD button to control the tape deck. To reset a button to its factory setting Repeat the above procedure. To reset all the function buttons to their factory setting Press ?/1, AV ?/1 and MASTER VOL – at the same time. 52GB Additional Information If you have any question or problem concerning your Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. On power sources • Before operating the unit, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the receiver. • The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the receiver itself has been turned off. • If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. • (Models of area code U, CA only) One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. • AC power cord must be changed only at the qualified service shop. On heat buildup Although...