Оценок - 4, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Ресиверы и усилители - STR-DA3400ES (21.28 mb)
Ресиверы и усилители - STR-DA3400ES (19.26 mb)
Фрагмент инструкции
Select “HDMI” in the Settings menu. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38). Video settings menu parameters HDMI settings menu parameters ■ Resolution (Video signals conversion) Lets you convert the resolution of analog video input signals. • DIRECT • AUTO • 480i/576i • 480p/576p • 720p • 1080i • 1080p For details on operation, see “In the video input/output conversion table classified by the menu settings” (page 34). ■ Control for HDMI (Control for HDMI) Lets you turn the components connected to the HDMI jack using an HDMI cable on or off. • OFF • ON For details on operation, see “Using the Control for HDMI function for “BRAVIA” Sync” (page 75). ■ Audio Out (HDMI audio input setting) Lets you set the audio output for HDMI from the playback component connected to the receiver via an HDMI connection. • TV+AMP The sound is output from the TV’s speaker and the speakers connected to the receiver. Notes • The sound quality of the playback component depends on the TV’s sound quality, such as the number of channels, the sampling frequency, etc. When the TV has stereo speakers, the sound output from the receiver is also stereo as that of the TV, even if you play multi channel source. • When you connect the receiver to a video component (projector, etc.), sound may not be output from the receiver. In this case, select “AMP”. • When you select the input that you have assigned the HDMI input, sound does not output from the TV. 56GB • AMP The HDMI audio signals from the playback component is only output to speakers connected to the receiver. The multi channel sound can be played back as it is. Note Audio signals are not output from the TV’s speakers when “Audio Out” is set to “AMP”. ■ Subwoofer Level (Subwoofer level for HDMI) Lets you set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an HDMI connection. You can set the level for each HDMI input independently. • 0 dB • +10 dB • AUTO The subwoofer level is automatically set to 0 dB or +10 dB depending on the frequency. Settings for the system (System settings menu) You can use the System settings menu to customize the settings of the receiver. Select “System” in the Settings menu. For details on adjusting the parameters, see “7: Operating the receiver using the GUI (Graphical User Interface)” (page 38). System settings menu parameters ■ Screen Saver (Screen Saver) Lets you activate the screen saver function for the GUI menu on the TV connected to the receiver. • ON When there has been no operation attempted for 15 minutes, the screen saver function is activated automatically. • OFF The screen saver function is disabled. ■ Language (Language) Lets you select the language for the GUI menu on the TV connected to the receiver. • English • Español • Français • Deutsch 57GB Amplifier Operations Enjoying Surround Sound 6 Press v/v repeatedly to select the sound field you want. The receiver will output stereo sound from L/R speakers only. No subwoofer output will be created, as no sound-field circuits will be used. All surround formats will be changed to stereo output only. Back Enjoying a preprogrammed sound field 2 3-6 MENU 1 Start playing a sound source you want to listen to (CD, DVD, etc.). 2 Press GUI MODE repeatedly to select “GUI ON”. “GUI MODE” appears in the display window of the receiver and the GUI menu appears on the TV screen. Press MENU if the GUI menu does not appear on the TV screen. 3 Press v/v repeatedly to select “Settings”, then press © or b. The Settings menu list appears on the TV screen. 4 Press v/v repeatedly to select “Surround”, then press © or b. 5 Press v/v repeatedly to select “Sound Field Setup”, then press ©. To select the Enhanced Surround mode 1 Select “Enhanced Sur Mode” in step 5. 2 Press v/v repeatedly to select the enhanced surround sound you want. 3 Press @. Note The selected Enhanced Surround mode can only be applied if you have selected “Enhanced Surround” as a sound field in the “Sound Field Setup” parameter. To adjust the effect level 1 After selecting the sound field in step 6, press ®. 2 Press v/v repeatedly to adjust the effect level, then press @. Higher settings apply more surround effect. You can adjust the effect level in 4 steps (50%, 80%, 100%, 150%). Note You may not able to adjust the effect level for some sound fields. 58se Types of 2CH mode ■ 2ch Stereo The receiver outputs the sound from the front left/right speakers only. There is no sound from the subwoofer. Standard 2 channel stereo sources completely bypass the sound field processing and multi channel surround formats are downmixed to 2 channel except LFE signals. Note No sound is output from the subwoofer in the 2ch Stereo mode. To listen to 2 channel stereo sources using the front left/right speakers and a subwoofer, select “A.F.D. Auto”. This receiver will generate a...