Оценок - 6, средний балл: 4.2
(
)
)
|
К этому устройству также есть другие инструкции:
Ресиверы и усилители - STR-DA1500ES (1.53 mb)
Ресиверы и усилители - STR-DA1500ES (3.86 mb)
Фрагмент инструкции
For details on the remote button operation, see page 8. • Be sure you have connected the MONITOR OUT of the receiver to the TV (page 34). Changing the display You can check the volume level, etc., by changing the information on the display. Be sure to use the buttons on the receiver for this operation. Press DISPLAY repeatedly. Each time you press the button, the display changes cyclically as follows. All inputs except the FM and AM band Index name of the inputa) —► Selected input —— Volume level FM and AM band Program Service nameb) or preset station namea) —— Frequency —— Program Type indicationb) — Radio Text indicationb) — Current Time indication (in 24-hour system mode)b) — Volume level a) Index name appears only when you have assigned one to the input or preset station (page 22, 30). Index name does not appear when only blank spaces have been entered, or it is the same as the input name. b)During RDS reception only (models of area code CEL, CEK only) (page 31). Note Character or marks may not be displayed for some languages. 35GB Other Operations Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Press SLEEP repeatedly while the power is on. Each time you press the button, the display changes cyclically as follows: 0-30-00 — 1-00-00 — 1-30-00 — 2-00-00 — OFF When sleep timer is being used, “SLEEP” lights up in the display. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled. Recording using the receiver You can record from an audio/video component using the receiver. Refer to the operating instructions supplied with your recording component. Recording onto a MiniDisc or audio tape You can record onto a MiniDisc or audio tape using the receiver. Refer to the operating instructions supplied with your MD deck or tape deck. 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR on the receiver. 2 Prepare the playback component for playing. For example, insert a CD into the CD player. 3 Prepare the recording component. Insert a blank MD or tape into the recording deck and adjust the recording level. 4 Start recording on the recording component, then start playback on the playback component. Note Sound adjustments do not affect the signal output from the MD/TAPE OUT jacks. 36eB Recording onto a recording media 1 Press one of the input buttons to select the playback component. You can also use INPUT SELECTOR on the receiver. 2 Prepare the playback component for playing. For example, insert the video tape you want to copy into the VCR. 3 Prepare the recording component. Insert a blank video tape, etc. into the recording component (VIDEO) for recording. 4 Start recording on the recording component, then start playback on the playback component. Note Some sources contain copy guards to prevent recording. In this case, you may not be able to record from the source. Using multi-zone features You can enjoy images and sounds from a component connected to the receiver in a zone (zone 2) other than the main zone. For example, you can watch the DVD in the main zone and listen to the CD in zone 2. When using an IR repeater (not supplied), you can operate both components in the main zone and Sony receiver in zone 2 from zone 2. • Switching the output source for the ZONE 2 OUT jacks. • Switching the Sony receiver’s power on or off in zone 2. The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone. About the IR REMOTE jack You can operate the receiver without pointing the remote towards the IR repeater of the receiver if you connect an IR repeater (not supplied) to the IR REMOTE jack. Use an IR repeater when you install the receiver in a place where signals from the remote cannot reach. STR-DA1500ES IR repeater (not supplied) 37GB Other Operations Making a multi-zone operation Zone 2 connections Outputs sound from speakers in zone 2 using the receiver and another amplifier. Main zone Zone 2 © Video component © IR repeater (not supplied) © Speakers © Sony Amplifier/Receiver 38BB Operating the receiver from zone 2 The following operations are described for connecting an IR repeater and operating the receiver in zone 2. When an IR repeater is not connected, use this receiver in the main zone. Tip Even when this receiver is in standby mode (press 1/1 on the remote to turned off this receiver), the receiver in zone 2 remains turned on. To turn off all receivers, press 1/1 and AV 1/1 on the RM-AAU056 remote at the same time (SYSTEM STANDBY). TVI/fh ■ INPUT 1/(1) AVI/0 "Q o o (X3> SYSTEM STANDBY VIDEO B D/DVD SAT M D/TAPE ® ® ® 0 PHONO SA-CD/CD TUNER DM PORT ® ® ® ® TV INPUT SLEEP DIMMER ON/OFF CD CD CD CD BD/DVD ME...