Оценок - 4, средний балл: 3.3
(
)
)
|
Фото и характеристики Sony STR-DH500 |
К этому устройству также есть другие инструкции:
Ресиверы и усилители - STR-DH500 (1.2 mb)
Ресиверы и усилители - STR-DH500 (658.86 kb)
Ресиверы и усилители - STR-DH500 (3.28 mb)
Ресиверы и усилители - STR-DH500 (2.22 mb)
Фрагмент инструкции
It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Notes • To input multi channel digital audio from the DVD player, set the digital audio output setting on the DVD player. Refer to the operating instructions supplied with the DVD player. • As this receiver does not have analog audio input jacks for DVD, connect your DVD player to the DIGITAL COAXIAL DVD IN jack on the receiver. To output sound from the front left/right speakers only, press 2CH. Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. © Coaxial digital cord (not supplied) © Component video cord (not supplied) © Video cord (not supplied) 2QGB Connecting a satellite tuner/ set-top box The following illustration shows how to connect a satellite tuner or a set-top box. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. © Audio cord (not supplied) © Optical digital cord (not supplied) © Component video cord (not supplied) © Video cord (not supplied) Notes • When connecting optical digital cords, insert the plugs straight in until they click into place. • Do not bend or tie optical digital cords. Tip All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies. 21GB Getting Started 5: Connecting the antennas (aerials) Connect the supplied AM loop antenna (aerial) and FM wire antenna (aerial). Before connecting the antennas, make sure to disconnect the AC power cord (mains lead). FM wire antenna (aerial) (supplied) AM loop antenna (aerial) (supplied) • The shape of the connector varies depending on the area code of this receiver. Notes • To prevent noise pickup, keep the AM loop antenna (aerial) away from the receiver and other components. • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. © Audio cord (not supplied) © Video cord (not supplied) Connecting components with analog video and audio jack The following illustration shows how to connect a component which has analog jacks such as DVD recorder, VCR, etc. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Notes • Be sure to change the factory setting of the VIDEO input button on the remote so that you can use the button to control your DVD recorder. For details, see “Changing button assignments” (page 60). •You can also rename the VIDEO input so that it can be displayed on the receiver’s display. For details, see “Naming inputs” (page 30). 22gb 6: Preparing the receiver and the remote Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead) to a wall outlet. Notes • Before connecting the AC power cord (mains lead), make sure that the stripped end of the speaker cords are not touching each other between the speaker terminals. • Connect the AC power cord (mains lead) firmly. AC power cord (mains lead) To the wall outlet Performing initial setup operations Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults. Be sure to use the buttons on the receiver for this operation. 1/1 C3 __ o 1-1 o . O □ EzjIQBIo © 1E3 E3 Ë3 E3 10 O O MEMORY/ENTER 1 Press 1/1 to turn off the receiver. 2 Hold down 1/1 for 5 seconds. “PUSH” and “ENTER” appears on the display alternately. 3 Press MEMORY/ENTER. After “CLEARING” appears on the display for a while, “CLEARED” appears. All the settings you have changed or adjusted are reset to the initial settings. 23GB Getting Started Inserting batteries into the remote 7: Calibrating the appropriate settings automatically (AUTO CALIBRATION) Insert two R6 (size-AA) batteries in the RM-AAU020 Remote Commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. • When you replace the batteries, the remote buttons may be reset to their factory settings. If this happens, reassign the buttons again (page 60). • When the remote no longer operates the receiver, replace all the batteries with new ones. This receiver is equipped with DCAC (Digital Cinema Auto Calibration) Technology, which allows you to perform automatic calibration as follows: • Check the connection between each speaker and the receiver. • Adjust the speak...