Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Ресиверы и усилители - STR-DG720 (1.07 mb)
Ресиверы и усилители - STR-DG720 (4.1 mb)
Фрагмент инструкции
“DTS-ES” lights up when the receiver is decoding DTS-ES signals. “DTS 96/24” lights up when the receiver is decoding DTS 96/24 (96 kHz/24 bit) signals. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is set to “AUTO” (page 68). H MEMORY Lights up when a memory function, such as Preset Memory (page 59), etc., is activated. I Tuner Lights up when using the indicators receiver to tune in radio stations (page 57), etc. Note “RDS” appears for models of area code CEL, CEK only. J Preset Lights up when using the station receiver to tune in radio indicators stations you have preset. For details on presetting radio stations, see page 58. K D.RANGE Lights up when dynamic range compression is activated (page 38). L NEO:6 Lights up when DTS Neo:6 Cinema/Music decoder is activated (page 52). M COAX Lights up when INPUT MODE is set to “AUTO” and the source signal is a digital signal being input through the COAXIAL jack (page 68). N HDMI Lights up when the receiver recognizes a component connected via an HDMI IN jack (page 20). Name Function O Playback channel indicators L R C SL SR S SBL SBR SB The letters (L, C, R, etc.) indicate the channels being played back. The boxes around the letters vary to show how the receiver downmixes the source sound (based on the speaker settings). Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround components obtained by Pro Logic processing) Surround Back Left Surround Back Right Surround Back (the surround back components obtained by 6.1 channel decoding) Example: Recording format (Front/ Surround): 3/2.1 Output channel: When surround speakers are set to “NO” (page 40) Sound Field: A.F.D. AUTO EEC® SL SR 8fifl A DIGITAL INPUT/OUTPUT section OPTICAL Connects to a DVD IN jacks player, etc. The _COAXIAL jack COAXIAL IN provides a better jack sound quality (page 22, 23). □ a HDMI IN/ OUT* jacks Connects to a DVD player, satellite tuner, or a Blu-ray disc player. The image is output to a TV or projector while the sound can be output from a TV or/and speakers connected to this receiver (page 20). B ANTENNA section FM ANTENNA jack Connects to the supplied FM wire antenna (aerial) (page 26). AM Connects to the ANTENNA supplied AM loop terminals antenna (aerial) (page 26). C COMPONENT VIDEO INPUT/ OUTPUT section Green (Y) Blue (Pb/Cb) Red (Pr/Cr) Y, PB/CB, PR/CR Connects to a IN/OUT* jacks DVD player, TV, satellite tuner, etc. You can enjoy high quality image (page 17-23). D SPEAKERS section Connects to the speakers (page 15). ISI- E AUDIO INPUT/OUTPUT section AUDIO IN/ White (L) OUT jacks Red (R) Connects to a Super Audio CD player, CD recorder, etc. (page 18). AUDIO OUT Connects to a sub jack woofer (page 15). Black continued 9GB Getting Started F VIDEO/AUDIO INPUT/OUTPUT section AUDIO IN/ White (L) OUT jacks Red (R) VIDEO IN/ Yellow OUT* jacks Connects to a VCR, DVD player, etc. (page 17-24). GDMPORT DMPORT Connects to a jack DIGITAL MEDIA PORT adapter (page 70). * You can watch the selected input image when you connect the MONITOR OUT or HDMI OUT jack to a TV or projector (page 17). Remote commander You can use the supplied RM-AAU023 Remote Commander to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate (page 74). M 0 0 0 TV SA-CD/CD TUNER ® 0 0 2CH CD A.F.D. MOVIE MUSIC CD CD CD ED EH El Eg TV CH - TV CH + PRESET - REPLAY ADVANCE PRESET + . Q-D (> TUNING - _ TUNING + <9 © FM MODE 0 (0 4 5 6 7 8 9 e; Ea ES Ed Ef 10fis Name Function Name Function A TV I/1 Press TV 1/1 and TV (O) at (on/standby) the same time to turn the TV on or off. AV I/1 (on/standby) Press to turn on or off the Sony audio/video components that the remote is assigned to operate (page 74). If you press 1/0 (B) at the same time, it will turn off the receiver and other Sony components (SYSTEM STANDBY). Note The function of the AV 1/0 switch changes automatically each time you press the input buttons (C). B i/1 Press to turn the receiver on or (on/standby) off. To turn off all Sony components, press 1/0 and AV 1/0 (A) at the same time (SYSTEM STANDBY). C Input buttons Press one of the buttons to select the component you want to use. When you press any of the input buttons, the receiver turns on. The buttons are factory assigned to control Sony components. You can change the button assignments following the steps in “Changing button assignments” on page 74. D 2CH A.F.D. MOVIE Press to select a sound field. MUSIC E THEATRE Press to enjoy optimal image suited for movies and to output the sound from the speakers connected to this receiver automatically. Note This button will only function if your TV is compatible with Theatre Mode. Refer to the operating instructions supplied with the TV for details. F DVD/BD MENU Press to display the m...