Оценок - 5, средний балл: 3.6
(
)
)
|
Фото и характеристики Sony STR-DK5 |
Фрагмент инструкции
•N (No) (delay time : 0 ms) The audio output is not delayed. Notes • This parameter is useful when you use a large LCD or Plasma monitor or projection TV. • This parameter is only valid when you use a sound field selected with the 2CH or A.F.D. buttons. • This parameter is not valid when PCM 96 kHz or DTS 2048 signals are input. xDEC. XXXX (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. •AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. •PCM PCM signals are given priority (to prevent the interruption when playback starts). Even when other signals are input, the sound is output. However, this receiver cannot decode DTS-CD when set to “DEC. PCM”. Note When set to “DEC. AUTO” and the sound from the digital audio jacks (for CD, etc.) is interrupted when playback starts, set to “DEC. PCM”. xDUAL XXX (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. • M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. • M (Main) Sound of the main language will be output. • S (Sub) Sound of the sub language will be output. • M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. x[DIMMER] (Brightness of the display) Lets you adjust the brightness of the display in 3 steps. xNAME IN (Naming the inputs) Lets you set the name of inputs selected with the input buttons on the remote (except for TUNER). For details, see “Naming preset stations and inputs” on page 30. Advanced Adjustments Settings 29GB Other Operations Naming preset stations and inputs You can enter a name of up to 8 characters for preset stations and inputs selected with the input buttons, and display it in the receiver’s display. Use the remote for the operation. 1 To index a preset station Press TUNER to select the FM or AM band, then tune in the preset station you want to create an index name for (page 19). Then, press MAIN MENU repeatedly to select “ TUNER ”. To index an input Press the input button (VIDEO 1, VIDEO 2, DVD or SA-CD/CD) to select the input you want to create an index name for. Then, press MAIN MENU repeatedly to select “ CUSTOM ”. 2 Press V or v repeatedly to select “NAME IN”. 3 Press ENTER. The cursor flashes and you can select a character. 4 Use V or v and B or b to create an index name. Press V or v repeatedly to select a character, then press b to move the cursor to the next position. Tips • You can select the character type as follows by pressing V or v repeatedly. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press V or v repeatedly until a blank space appears in the display. • If you made a mistake, press B or b repeatedly until the character you want to change flashes, then press V or v repeatedly to select the correct character. 5 Press ENTER to store the index name. Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. Press SLEEP while the power is on. Each time you press SLEEP, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF While using Sleep Timer, “SLEEP” lights up in the display. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled. 30GB Enjoying the lighting effects You can create a party environment using the D-LIGHT SYNC OUT jack on this receiver. Connect the lighting devices (not supplied) to the D-LIGHT SYNC OUT jack using the D-LIGHT SYNC Controller (DLS-1) (not supplied). The D-LIGHT SYNC Controller will synchronize the lighting effects to the music’s rhythm. Other Operations SA-CD/CD AUDIO IN AUDIO IN VIDEO 2 AUDIO IN VIDEO 1 AUDIO IN DIGITAL OPTICAL SA-CD/ CD IN AM ANTENNA MIC OUT D-LIGHT SYNC OUT R L L L R COAXIAL DVD AUDIO OUT SUB WOOFER DVD IN R Lighting devices (not supplied) D-LIGHT SYNC Controller (DLS-1) (not supplied) For details on the use of the D-LIGHT SYNC Controller and the lighting devices, refer to operating instructions supplied with the respective devices. 31GB Optional karaoke scoring system If you have a karaoke component with karaoke scoring system (for example, DVDKARAOKE), you can view your karaoke score on your TV screen using the MIC OUT jack on this receiver. Connect the karaoke component to MIC OUT jack using an audio cord (not supplied). For details on the use of the karaoke component, refer to operating instructions supplied with the karaoke component. Note You can use the MIC 1 and MIC 2 jacks simultaneously for this operation. The signal will be output from the MIC OUT jack to the connected karaoke component. 32GB Operations Using the Remote RM-AAU002 Operations Using...