Оценок - 1, средний балл: 3 ( )

Производитель: Philips Размер: 1.84 mb Название файла: Язык инструкции:

compatible software versions. An onscreen message will notify you if the channel list cannot be copied to the second TV. Note: If you are prompted to enter a code, enter '8888'. Copy channel list to USB 1. Connect a USB storage device to the TV with the channels installed on it. 2. Press . 3. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to USB], then press OK. The channel list is copied to the USB storage device. 4. Unplug the USB storage device. Copy channel list to TV with no channels installed 1. Switch on the TV with no channels installed on it to start the initial installation. Select the language and country. The country setting must be the same as that of the TV whose channel list you want to copy. Skip the search for channels. 2. Connect the USB storage device containing the channel list to the TV. 3. Press . 4. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK.The channel list is copied to the TV. 5. Unplug the USB storage device. Copy channel list to TV with channels installed 1. Switch on the TV on which you want to copy the channel list. 2. Press . 3. Select [Setup] > [Search for channels] > [Reinstall channels], then press OK. You will be prompted to select the country where the TV was installed. Make a note of the current setting and press followed by [Cancel] to exit. 4. If the country setting on the TV is different from that of the TV whose channel list you want to copy, reinstall the TV and select the country setting to match the first TV. See Set up your TV > Reinstall the TV (Page 43). 5. Connect the USB storage device containing the channel list to the TV where you want to copy the channel list. 6. Select [Setup] > [TV settings] > [Preferences] > [Channel list copy] > [Copy to TV], then press OK. The channel list is copied to the TV storage device. 7. Unplug the USB storage device. Menu language 1. While you watch TV, press . 2. Select [Setup] > [TV settings] > [Preferences] > [Menu language]. 3. Select a menu language from the list, then press OK. Set universal access Switch on Some digital TV broadcasters provide special audio and subtitle features for people who are hearing or visually impaired. To enable these features, turn on universal access in the preference menu. 1. Press . 2. Select [Setup] > [TV settings] > [Preferences]. 3. Select [Universal access] > [On], then press OK. Hearing impaired Tip: To verify whether a hearing impaired audio language is available, press OPTIONS and select [Audio language]. Languages with an ear icon support hearing impaired audio. To switch on hearing impaired audio and subtitles 1. While you watch TV, press OPTIONS. 2. Press one of the following buttons to select an option: . Red: Switch hearing impaired on or off. . Green: Switch on hearing impaired audio and subtitles. 3. Press to exit. Visually impaired Tip: To verify whether visually impaired audio is available, press OPTIONS and select [Audio language]. Languages with an eye icon support visually impaired audio. To switch on visually impaired audio (if available) 1. While you watch TV, press OPTIONS. 2. Press the green button to select [Visually impaired]. 3. Press one of the following buttons to select an option: . Red - [Off]: Turn off visually impaired audio. . Yellow - [Headphones]: Hear visually impaired audio from headphones only. (if applicable) . Green - [Speakers]: Hear visually impaired audio from speakers only. . Blue - [Speakers + headphones]: Hear visually impaired audio from speakers and headphones. 4. Press to exit. Note: If the EasyLink remote control is enabled, you cannot select the green or yellow buttons. To disable, see Use more of your TV > Use EasyLink > Switch on (Page 34). Adjust volume for the visually impaired 1. In the [Universal access] menu, press the yellow button to select [Mixed volume]. 2. Press the Navigation buttons to move the slider up or down, then press OK. 3. Press to exit. Audio feedback for the visually impaired This feature enables audio feedback when buttons are pressed on the remote control or TV. 1. In the [Universal access] menu, press the blue button to select [Key beep]. 2. Press the green button to turn on audio feedback, or press the red button to turn it off. 3. Press to exit. Other settings TV demo Start a demo to find out more about your TV's features. Note: Demos are not supported on MHEG channels. 1. While you watch TV, press . 2. Select [Setup] > [Watch demos], then press OK. 3. Select a demo, then press OK. 4. Press to exit. Update software TV software Check software version 1. Press . 2. Select [Setup] > [Software settings] > [Current software info], then press OK. The version of the current software is displayed. Caution: Do not install a lower version of software than the current version installed on your product. TP Vision cannot be held liable or be made responsible for problems caused by a software downgrade. Update the software through one of these...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: