Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Interval for saving Track History . Strategy (Full/Forever) . Percentage of memory used (status only) 1. In the Map function, turn the LARGE knob to reach the Map Setup page. Turn the SMALL knob to the first Track History page. Press SEL to start editing the waypoint types. Pressing the TRK and SAV smart keys toggle the available options. Pressing the INTV smart key enables selection of the interval value. SEL Moving Map Functions Trk History:Off Save By:Distance Interval:0.5 2. Turn the SMALL knob to select On or Off. 3. Turn the LARGE knob to the Save By option. Turn the SMALL knob to choose Distance or Time. 4. Turn the LARGE knob to the Interval option. Turn the SMALL knob to choose the Interval value. If you chose to Save By Distance, select a distance between 0.1 and 10.0 nm. If you chose Save By Time, select a time between 1 sec. (00:01) and 10 minutes (10:00). 5. Press ENTER when you have completed your selections. 6. Turn the SMALL knob clockwise to the second Track History page. Press SEL to start selection or press the appropriate smart key. The Strategy value will flash. Turn the SMALL knob to change the value. Strategy:Full Clear Track:No %used:12 SEL ENTER ENTER 7. Turn the LARGE knob to the Clear Track option. Turn the SMALL knob to choose Yes to clear (delete) existing Track History or No to leave existing Track History in place. If you select Yes for Clear Track, the %used value will return to zero. 8. Press ENTER when you have completed your selections. Moving Map Functions Airspace Setup The Airspace Setup selections allows you to turn Airspace notification (Alerts) or map display of Airspaces On or Off, select the distance and time buffers for airspace alerts, turn ATC rings On or Off, and to choose the Airspace types that will be used. Airspace alerts will not be given during an approach. 1. In the Map function, turn the LARGE knob to reach the Route Line/Map Orient page. Then, turn the SMALL knob two clicks clockwise. The Airspace Setup page is shown. Airspace Setup Map :ON Alerts: ON SEL 2. Turn the SMALL knob to view the pages for Airspace Setup. On this page you may select whether Airspaces are shown on the Map display or whether Airspace Alerts are provided. Press SEL to start selection. The Map choice will flash. Turn the SMALL knob to select On or Off. The Map (MAP) and Alert (ALE) “smart” keys also select the options. Airspace Setup Map : Off Alerts: Off ENTER 3. Turn the LARGE knob to move to the Alerts choice. This sets the Alert value for all airspaces. If set to ON, each airspace alert may be set separately. Setting Alerts OFF turns off all airspace alerts. Turn the SMALL knob to select On or Off. Press ENTER after completing your choices. Airspace alerts are automatically disabled when an approach is enabled. Airspace Setup Map :On Alerts: On 4-10 Moving Map Functions Airspace Buffers Three values may be adjusted for Airspace Buffers for determining CLOSE information: distance, elevation, and time. CLOSE distance may be from 0 to 99 nm at one nm intervals. Altitude values are from 0 to 9900 feet in 100 foot intervals. Time values are from 0 to 20 minutes in one minute intervals. From the Map Setup page, turn the SMALL knob three clicks cw to reach the Airspace Buffers page. 1. While viewing the Airspace Buffer page, press SEL. The distance value will flash. SEL Airspace Buffers Dist Alt Time 2nm 500’ 10min 2. Turn the LARGE knob to select the desired value to change. Turn the SMALL knob to change the value. Airspace Buffers Dist Alt Time 2nm 500’ 10min ENTER 3. Press ENTER when the desired values have been selected. Airspace Buffers Dist Alt Time 2nm 200’ 10min 4-11 Moving Map Functions SEL ATC Ring Selection When this choice is turned ON,a5nm radius artificial “ATC Ring” is drawn on the Map display around airports that have a control tower. From the Map Setup page, turn the SMALL knob four clicks cw to reach the ATC Ring selection page. 1. While viewing the ATC Ring page, press SEL to start selection. 5 nm ATC Rings Map : Off ENTER 2. Turn the SMALL knob to choose ON or OFF. Press ENTER after completing your selection. 5 nm ATC Rings Map :On Airspace Selections The Airspaces available for selection are: Class B (Off, Outer, or Sector), Class C (Off, Outer, or Sector), MOA, Training, Unknown, Alert, Caution, Danger, Restricted, Prohibited, and Warning. You may select ON or OFF for map display and alerts for each Airspace type. Outer Sector 4-12 Moving Map Functions The Outer selection refers to the outline of the outside ring extended from the ground on up. Selecting Outer will be useful to VFR pilots who wish to avoid all airspaces. The sector selection refers to the outside edges of the sector from the ground on up unless you have altitude input which then allows for 3-dimensional information. The Sector selection is the default setting and is most useful for IFR flight. An airspace will appear in the Nearest list even if the map or alert selections are set to off. The Ma...
Эта инструкция также подходит к моделям:Ресиверы и усилители - 55 (3.91 mb)
Ресиверы и усилители - 50 (3.91 mb)
Ресиверы и усилители - 65 (3.91 mb)