Оценок - 4, средний балл: 3.8 ( )

Производитель: Haier Размер: 741.84 kb Название файла: Язык инструкции:

Please do some adjustment as follows to meet your needs. 1. Press the MENU button, and then press CH+/- buttons to select the menu in the main menu: PICTURE, SOUND, TUNE ,SETUP and TIMER. Off course, you may select these menus directly by pressing the PICTURE, SOUND, TIME and FUNCTION buttons on the remote control. 2. If it is not in sub-menu, press the VOL-/+ buttons to enter the sub-menu. 3. Then press the CH+/- to select the desired item, press the VOL-/+buttons to adjust the numerical value. After that, press the MENU button to return the main menu. 4. If you want exit the menu, press the MENU button repetitiously. Switch on/ off the TV set In the following, the methods of using power switch and remote control to switch on/off power supply for the TV set will be explained. Switch on/ off the TV set POWER Switch on/ off the TV set 1.Connect the power supply wire. Then press the power switch button, the power indicator will light, in several seconds the picture will display on the screen. 2. If the TV is in the state of standby, press the POWER button or the CH+/- buttons on the remote control. Note: 1. Press the P+/- buttons which is on the TV set to get out of the standby state when the remote control is not in use. 2. Press the POWER button on the remote control to the standby mode. 3. Press the power button on the TV set to completely power off the TV. 4. To eliminate the magnetization completely, the TV set degausses automatically. There is the sound of PENG, it is natural. Automatic stand by function If no signal has been received, and after five minutes, it will stand by automatically. Watching TV Programs Watching TV programs CH+ CH- VOL-VOL+MENU How to select the TV program Select the desired program 1. Use the direct number selection button Press the button from 0-9 to select a one-figure channel. If you want to select a double figures channel, press the figure-selection button and change it into two-figure mode, then press the number of the channel. If you want to select a three figures channel, press the figure-selection button and change it into three-figure mode, then press the number of the channel. 2. Use the CH+/- buttons Press the CH+ button to select the channel of the larger number. Press the CH- button to select the channel of the smaller number. Select the desired sound Press the VOL+/- buttons to adjust the volume to your need. If the colour or sound of a certain channel is abnormal CH+ CH- VOL-VOL+MENU If the TV set you bought is abnormal in colour or sound in a certain channel, it might be because the colour or sound system has been set improperly. You may follow the instruction below to adjust it. Press the MENU button, then press CH+/- buttons to select function menu, and you can see the form . Then press VOL+ button to enter sub- Language English Screen Saver On Curtain Color sys. PAL50 HDM scan 60Hz Transparency On Tilt 0 MENU Picture Sound Tune Setup Timer menu. CH+ CH- VOL-VOL+MENU If the colour of the picture is abnormal Press the CH+/- buttons to move the indicator to "Color Sys.", and press the VOL+/- buttons to select the proper color. If the sound is abnormal Refer the above steps to enter the Program edit menu. Press the CH+/- buttons to move the indicator to "Sound Sys.", and press the VOL+/- buttons to select the proper sound. Program edit Program NO. 2 Skip Off Lock Off Sound Sys. DK Fine tune <144.20MHz> Watching TV Programs (continued) Swap function enables quick swap to the last watched program. Program swap and auto scan functions SWAP SCAN CH+ CH- VOL-VOL+MENU Program swap 1. Suppose the channel number you used just now is 8 and the channel number you are using is 18 (as shown in the figure). 2. If you want to return to the last watched program channel 8, you can simply press the SWAP button. 3. If you want to return to channel 18, press the button again. Through this function, you can easily change between the channel you are using and the channel you used last time. Auto program scan 1. Press the SCAN button to scan through all the memorized TV channels. 2.When it is the program that you desired, and press the MENU button to confirm. Tuning The TV set has three methods to set the channels, which are Auto search, Search and Fine tune. In this section, how to use the remote control to set the channel is explained. You can also use the buttons on the TV set to set channel. Auto search Auto search 1. Press the MENU button to display the menu, then press CH+/-buttons to select TUNE menu, press VOL+ button to enter. Exchange Program edit Search Auto Search Quick Search MENU Picture Sound Tune Setup Timer Exchange Program edit Search Auto Search Quick Search MENU Picture Sound Tune Setup Timer CH+ CH- VOL-VOL+MENU 2. Press the CH+/- buttons to move the indicator to " Auto Search ". 3. Press the VOL+ button, and "Auto Search" mode will work. The TV set will search automatically all available programs, after search is finished, all available programs will be stored in...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: