Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at the user's own expense. Canadian Regulations This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out on the radio interference regulations of the Canadian Department of Communications. European Regulations Warning This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Copyright Restrictions © 1996, 1997 TRANSITION Networks. All rights reserved. No part of this work may be reproduced or used in any form or by any means -graphic, electronic, or mechanical - without written permission from TRANSITION Networks. Trademark Notice All registered trademarks and trademarks are the property of their respective owners. 33009.C TRANSITION networks Minneapolis, MN 55344 USA 100BASE-TX/1OOBASE-FX Media Converters E-100BTX-FRL-01, E-100BTX-FRL-01(SC), E-100BTX-FRL-01(SM) USER'S GUIDE The TRANSITION Networks Ethernet™ 100BASE-TX to 100BASE-FX media converters connect 100BASE-TX unshielded twisted pair cable to 100BASE-FX multimode or singlemode fiber-optic cable. Media converter models are selected according to the fiber mode and fiber connector required at the site. Multimode fiber-optic cable can use either an ST connector (E-100BTX-FRL-01) or an SC connector (E-100BTX-FRL-01 (SC)). Singlemode fiber (E-100BTX-FRL-01 (SM)) uses only an SC connector. All media converters function in half-duplex mode or, when connected to devices capable of full-duplex connectivity, in full-duplex mode. E-100BTX-FRL-01 Provides an RJ-45 unshielded twisted pair '100BASE-TX connector and a set of RX (receive) and TX (transmit) ST 100BASE-FX connectors to multimode fiber-optic cable. e-ioobtx-frl-oi E-100BTX-FRL-01(SC) Provides an RJ-45 unshielded twisted pair '100BASE-TX connector and an RX (receive) and TX (transmit) SC 100BASE-FX COnneCtOr tO multimode Multimode Fiber fiber-optic cable. e-ioobtx-frl-oi(sc) E-100BTX-FRL-01(SM) Provides an RJ-45 unshielded twisted pair 100BASE-TX connector and an RX (receive) and TX (transmit) SC 100BASE-FX connector to singlemode fiber-optic cable. Status LEDs on the connector side of the media converters provide the following information: Pwr (Power) Illuminated green LED indicates connection to external AC power. RX (Receive) Flashing green LED indicates port is receiving data. Link Steady green LED indicates port is receiving link signal. I 2 9 ¿ Ï i J 2 1 . i* 1 r, is 1 Ethernet" 100BASE-TX Media Con 100BASE-FX T i i Multimode Fiber UTP ITE)-——-...
Эта инструкция также подходит к моделям:Ресиверы и усилители - MEDIA CONVERTERS E-100BTX-FRL-01 (79.23 kb)
Ресиверы и усилители - MEDIA CONVERTERS E-100BTX-FRL-01(SC) (79.23 kb)