Оценок - , средний балл: ( )

Инструкция по эксплуатации Channel Plus, модель CHANNEL PLUS 5115HHR

Производитель: Channel Plus
Размер: 176.32 kb
Название файла:

Язык инструкции:

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

Документ загружается, подождите пожалуйста

Скачать инструкциюЗакрыть

warrants this product free from defects in materials period of one year from the date repair, or at its option, replace the defective obtain warranty service, call MTI for authorization (RMA) number and return Attention: Customer Service. Please put the RMA number on the outside Any implied warranty arising from the sale of the product including implied warranties of merchantability and fitness for purpose are limited to the warranty stated above. MTI shall not be responsible for losses or damages or expenses, whether direct, consequential or incidental arising from the use of or the inability to use this product. Some states do not allow limitations on how long the implied warranty lasts or the exclusions or limitations or incidental or consequential damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which may vary from state to state. PERFORMANCE MULTI-ROOM VIDEO 5115 Modulator Model 5115HHR Model 5115BID Model 5115PAL 600-132 Rev.A ©1999 Multiplex Technology, Inc., Brea, Ca. The 5115 new channel carries audio/The 5115 was designed wiring or into new Contents: Channel Injector Wall plate Power Injector Power Supply Coax Jumper The 5115 series is comprised of a wall plate The channel injector is weather resistant indoors or outdoors close to the incoming CATV or antenna feed. The system uses the existing coax cable distribution and only requires a single run of Cat 5. The 5115 was designed to work with Cat 5 wiring. Although will function with quad wire, Cat 5 delivers the highest picture. The Cat 5 allows the use of an automatic line length and picture compensator. Quad wire does not take advantage of this enhancement. Model Differences: The model 5115HHR is a high headroom design for CATV and off air antenna feeds only. The model 5115BID is a bi-directional design for use with CATV cable boxes that are interactive or require bi-directional communications with the cable company. The model 5115PAL is designed to modulate PAL frequencies and use CATV or off air antenna feeds. Installation: First, locate the incoming CATV or antenna feed and install the channel injector at that location. Second, install the wall plate at the desired location and run Cat 5 wire from the wall plate to the channel location. Then connect a video source. Third, apply power and select an unused channel for the 5115 picture to appear on all the televisions. Installation Step One Locate the incoming or antenna (Usually found on the side Remove the ...