Оценок - 6, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Some RDS stations may not include some of these additional features. If the data required for the selected mode is not being transmitted, the Main Information Display O will show a NOTYPE, NOTEXTor NOTIMEmessage after the individual time out. In any FM mode the RDS function requires a strong enough signal for proper operation. Program Search (PTY) An important feature of RDS is its capability of encoding broadcasts with Program Type (PTY) codes that indicate the type of material being broadcast. The following list shows the abbreviations used to indicate each PTY, along with an explanation of the PTY: • (RDS ONLY) • (TRAFFIC) • NEWS: News • AFFAIRS: Current Affairs • INFO: Infomation • SPORT: Sports • EDUCATE: Educational • DRAMA: Drama • CULTURE: Culture • SCIENCE: Sciencek • VARIED: Varied Speech Programs • POPM: Popular Music • ROCKM: Rock Music • M.O.R.M.: Middle-of-the-Road Music • LIGHTM: Classical Music • CLASSICS: Serious Classical Music • OTHERM: Other Music • WEATHER: Weather Information • FINANCE: Financial Programs • CHILDREN: Children’s Programs • SOCIAL A: Social Affairs Programs • RELIGION: Religious Broadcasts • PHONE IN: Phone-In Programs • TRAVEL: Travel and Touring • LEISURE: Leisure and Hobby • JAZZ: Jazz Music • COUNTRY: Country Music • NATIONAL: National Music • OLDIES: Oldies Music • FOLK M: Folk Music • DOCUMENT: Documentary Programs • TEST: Emergency Test • ALARM: Emergency Broadcast Information You may search for a specific Program Type (PTY) by following these steps: 1. Press the RDS button ^ until the current PTY is shown in the Main Information Display O. 2. While the PTY is shown, press the Preset Up/Down button # or hold them pressed to scroll through the list of available PTY types, as shown above starting with the PTY currently received. To simply search for the next station transmitting any RDS data, use the Preset Up/Down button # until RDSONLY appears in the display. 3. Press any of the Tuning Up/Down buttons )K, the tuner begins to scan the FM band upwards or downwards for the first station that has RDS data that matches the desired selection, and acceptable signal strength for quality reception. 4. The tuner will make up to one complete scan of the entire FM band for the next station that matches the desired PTY type and has acceptable reception quality. If no such station is found, the display will read NONEfor some seconds and the tuner will return to the last FM station in use before the search. NOTE: Some stations transmit constant traffic information. These stations can be found by selecting TRAFFIC, the option in front of NEWSin the list. The AVR will find the next appropriate station, even if it is not broadcasting traffic information when the search is made. 42 TUNER OPERATION Programming the Remote The AVR 155 is equipped with a powerful remote control that will control not only the receiver’s functions, but also most popular brands of audio and video equipment, including CD players, TV sets, cable boxes, VCRs, satellite receivers and other home-theater equipment. Once the AVR’s remote is programmed with the codes for the pro ducts you own, it is possible to eliminate most other remotes and replace them with the convenience of a single universal remote control. Programming the Remote with Codes As shipped from the factory, the remote is fully programmed for all AVR functions, as well as those of most Harman Kardon CD changers, DVD players, CD players and cassette decks as well as the navigation controls for the Apple iPod. In addition, by following one of the methods below, you may program the remote to operate a wide range of devices from other manufacturers. Direct Code Entry This method is the easiest way to program your remote to work with different products. 1. Use the tables in the separate setup-code guide to determine the three-digit code or codes that match both the product type (e.g., VCR, TV), and the specific brand name. If there is more than one number for a brand, make note of the different choices. 2. Turn on the unit you wish to program into the AVR remote. 3. Press and hold the Input Selector 4 for the type of product to be entered (e.g., CD, Video 1/TV) for three seconds. When the Program Indicator 2 turns amber and begins flashing, release the button. It is important that you begin the next step within 20 seconds. 4. If the unit you wish to program into the AVR remote has a remotable Power on/off function, follow these steps: a. Point the AVR’s remote towards the unit to be programmed, and enter the first three-digit code number using the Numeric buttons H. If the unit being programmed turns off, the correct code has been entered. Press the same Input Selector 4 again, and note that the red light under the Input Selector will flash three times before going dark to confirm the entry. b. If the product to be programmed does NOT turn off, continue to enter the three-digit code numbers until the equipment turns off. At this point, the correct cod...