Оценок - 3, средний балл: 3.7
(
)
)
|
Фото и характеристики Alpine DVA-9861Ri |
Фрагмент инструкции
. Make a note of the current settings before making changes. If the vehicle’s battery is disconnected, the settings will be cleared and will return to the factory settings. Setting the DVD Audio Playback Mode To playback the DVD Audio Disc, you have a choice of 3 different settings. If the disc containing DVD Video and Audio, set VCAP (Video Capable Audio Player) or VOFF (Video OFF) to playback the DVD Audio. Setting item: DVD-A PLAY MODE Setting contents: VIDEO/VCAP/VOFF VIDEO: Only DVD Video is played back if the disc contains DVD Video and Audio. VCAP: DVD Audio is played back with Video. VOFF: DVD Audio is played back without Video. The initial setting at the factory is VCAP. • Perform this setting before inserting a disc. If a disc has already been inserted, perform the setting after you remove the disc. Setting the CD Play Mode The unit can be set to play only the audio data or only the MP3/WMA files on discs containing both audio data and MP3/WMA data. Setting item: CD PLAY MODE Setting contents: CD-DA/COMPRESSED CD-DA: Only CD data can be played back. COMPRESSED: Only MP3/WMA data can be played back. The initial setting at the factory is CD-DA. • If a disc has already been inserted, perform the setting after you remove the disc. Setting the Video CD Play Mode When playing a Playback Control (PBC) enabled video CD, you can choose to set PBC ON or OFF. Setting item: VCD PLAY MODE Setting contents: PBC ON/PBC OFF PBC ON: The PBC menu is displayed. PBC OFF: The PBC menu is not displayed. The initial setting at the factory is PBC ON. Playing the Bonus Group In addition to the usual group, DVD Audio also includes an addition Bonus Group. When the Bonus Group is selected, although the password input screen is displayed, you can pre-input a 4-digit password. Setting item: BONUS CODE Setting contents: CODE 1 Press or to select “BONUS CODE”, then press ENT. 2 Use the numeric keypad“0” to “9” to input 4-digit password, then press ENT. • Can be erased one digit at a time each time CLR is pressed. Press CLR for at least 2 seconds to delete all digits. • Press RETURN to return to the previous screen. 3 When the setting is complete, press SETUP. The setup returns to normal mode. • If the Bonus Group password differs from the password in the section you set, the input screen is automatically displayed. 35-EN Adjustment Procedure for Dolby Surround External Audio Processor (Optional) Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy. Adjustment procedure Rotary TA encoder BAND MODE Preset buttons (1 through 6) When an external audio processor is connected to this unit, you can operate it from this unit. Some audio processors may not be operated. When PXA-H900 is connected, some of the operations may not be performed from this unit. In this case, operate them in the connected product. Explanations below is the case when PXA-H700 or PXA-H701 is connected for example. Refer also to the operating instructions of the connected audio processor. • The adjustments or settings performed on the connected audio processor cannot be operated properly from this unit. • The setting “Setting the Speakers”, “Setting Bass Sound Control”, and “Graphic Equalizer Adjustments” are not available if the MRAD550 is connected. Additionally, if the MRA-F350 is connected, the following setting “Setting the MX mode” is not available. Also, the setting content differs between the PXA-H700 and PXA-H701. • This unit cannot be connected to the PXA-H510. • If no operation is performed for approximately 15 seconds when setting the external audio processor, the audio processor control mode is cancelled, and the normal mode returns. 1234567Speaker Setup (page 41) (Turning the speakers to be used on and off and setting their response) Adjusting the speaker levels (page 41) (Adjusting the signal output level to the various speakers) Mixing bass sound to the rear channel (page 42) (Achieving smooth sound in the rear seat by mixing the front audio signals with the rear speaker signals) Adjusting the acoustic image (page 42) (Adjusting the acoustic image to achieve a sound as if the centre speaker were directly in front of the listener) Achieving powerful high volume sound (page 43) (Achieving energetic sound with even greater power, like the sound in a movie theatre) Adjusting the DVD Level (page 43) (Adjust the volume (signal level) in the Dolby Digital, Pro Logic II, DTS and PCM modes.) Storing Settings in the Memory (page 44) (Storing all the settings and adjustments made on the DVA-9861Ri (not only the above settings/adjusts) in the memory) In case of combining the Automatic adjustments etc. We recommend to make the Automatic adjustments before the Dolby Surround adjustments. 36-EN MX CD (OFF, CD MX 1 to 3) Setting the Speakers CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity. 1 Check that Defeat mode is off (page 25...