Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
The Edit Channel window is displayed: If you wish to change your password, see .Changing Your Password. on page 28. 4 Use the ! and " keys to select the channel you wish to set as a favorite. 5 Use the $ key to highlight the FAV column for that channel and press SELECT. The .favorite. icon appears in the column. 6 Press EXIT twice to exit the on-screen menu. 25 Setting Parental Controls The HDT100 offers two options for parental controls: • V-Chip • Channel Lock You can use the V-chip technology to block certain types of programming from being viewed. The V-chip settings are based on the MPAA and TV ratings systems. Once you set the rating limit in the V-Chip Setup menu, no programming beyond that rating limit can be viewed. To set up your V-chip settings: 1 Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed. 2 Highlight Installation and press SELECT. The Password window is displayed. 3 Enter your four-digit password. If you have not yet created your own password, enter the default password: 0000. The Installation menu is displayed. If you wish to change your password, see .Changing Your Password. on page 28. 4 Highlight V-Chip Setup and press SELECT. The V-Chip Setup window is displayed. 5 Use the !"• $ keys to highlight the desired rating limit(s) and then press SELECT. 6 When finished, press EXIT twice to exit the on-screen menu. 26 You can lock a specific channel or channels so they cannot be viewed without entering a password. To lock a channel: 1 Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed. 2 Highlight Edit Channel and press SELECT. The Password window is displayed. 3 Enter your four-digit password. If you have not yet created your own password, enter the default password: 0000. The Edit Channel window is displayed: If you wish to change your password, see .Changing Your Password. on page 28. 4 Use the ! and " keys to select the channel you wish to lock. 5 Use the $ key to highlight the Lock column for that channel and press SELECT. The lock icon appears in the column. 6 Press EXIT twice to exit the on-screen menu. 27 Changing Your Password The default password that is already configured in the HDT100 is 0000. To change the password: 1 Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed. 2 Highlight System and press SELECT. The System menu is displayed. 3 Highlight Password and press SELECT. 4 Enter the current password or default password. 5 Using the number keys on the remote control, type in your four-digit password. 6 Re-enter your password to confirm it. 7 Press EXIT twice to exit the on-screen menu. 28 Setting Up the HDT100.s Clock for Your Time Zone To change the time zone for the HDT100.s clock: 1 Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed. 2 Highlight Installation and press SELECT. The Password window is displayed. 3 Enter your four-digit password. If you have not yet created your own password, enter the default password: 0000. The Installation menu is displayed. If you wish to change your password, see .Changing Your Password. on page 28. 4 Highlight Clock Setup and press SELECT. The Local Time window is displayed: 5 Use the # and $ keys to change the time zone. When you are finished, Press EXIT twice to exit the on-screen menu. 29 Adding a Channel If you wish to add a specific channel to your program list or you have made minor adjustments to your antenna, follow these steps for adding a single channel: 1 Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed. 2 Highlight Installation and press SELECT. The Password window is displayed. 3 Enter your four-digit password. If you have not yet created your own password, enter the default password: 0000. The Installation menu is displayed. If you wish to change your password, see .Changing Your Password. on page 28. 4 Highlight Manual Scan and press SELECT. The Manual Scan window is displayed: 5 Use the number keys on the remote control to enter the channel number. Press the " key and then press SELECT to start the scan. If the channel is successfully added, the .Get Channel Success. message is displayed. 30 6 Press EXIT twice to exit the on-screen menu. If the HDT100 is unable to lock on the channel.s signal, a .Time out error. message is displayed. Adjust the antenna.s position and try adding the channel again. Customizing the On-Screen Menu and i-Banner To change the transparency of the on-screen menu: 1 Press MENU on the remote control or MENU/ENTER on the front panel. The Menu screen is displayed. 2 Highlight Menu Setup and press SELECT. The Menu Setup menu is displayed. 3 Highlight Transparency and press SELECT. The transparency indicator bar is displayed. 4 Use the # and $ keys to change the transparency of the on-screen menu. 5 When finished, press EXIT twice to exit the on-screen menu. To configure how your...