Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Additionally, you can use the metronome for practicing as well as operate the tuner and metronome either separately or simultaneously. Installing batteries 1 Slide the battery compartment cover in the direction of the arrow located on the back of the TM-40, and remove it. 2 Insert batteries, making sure to observe the correct polarity. If the unit malfunctions try removing and then reinstalling the batteries. The included batteries are for the purpose of verifying operation; they may have a shorter lifespan than normal. When the batteries run down, a battery symbol will appear in the left of the display. When this occurs, replace the batteries. Using the stand You can use the stand provided on the back of the TM-40 to tilt it back at an angle for easy viewing. Parts of the TM-40 [TUNER ON] switch [METRONOME ON] switch TEMPO [^], [Ў] switches CALIB [^], [Ў] switches BEAT/TAP [^], [Ў] switches [START/STOP–TAP IN] switch [SOUND] switch INPUT jack Volume PHONE jack Tuning Guide Mic Turning the power on/off To turn the power on Press either the [TUNER ON] switch or the [METRONOME ON] switch and the power will turn on. When you press the [TUNER ON] switch, the TM-40 will enter Meter mode, and the tuning meter will appear in the display. The upper part of the display will indicate “TUNER.” When you press the [METRONOME ON] switch, the TM-40 will enter Beat mode, and the metronome pendulum will appear in the display. The upper part of the display will indicate “METRONOME.” The TM-40 lets you use the tuner and metronome simultaneously by simply turning on both power switches. To turn the power off The power will turn off when both the tuner and metronome are turned off. Turning the tuner off When the tuner is operating, press the [TUNER ON] switch to turn off the tuner. The tuner will also turn off automatically if not in use for twenty minutes. Turning off the metronome When the metronome is operating, press the [METRONOME ON] switch to turn off the metronome. The metronome will also turn off automatically if not in use for twenty minutes. Connections If you want to connect an instrument or contact mic etc. If you want to tune an instrument with a pickup, such as an electric guitar, connect a cable to your instrument, and plug the cable into the TM-40's INPUT jack. If you want to tune your instrument using a separately sold Korg CM-100 contact mic, plug the contact mic into the TM-40's INPUT jack. If you want to tune without making any connections, you can do so by using the internal mic. The INPUT jack is only for a 1/4”mono cable. Stereo (TRS) cables cannot be used. Connecting earphones You can connect 1/8” mini-plug earphones to the PHONE jack. When plugged in, no sound will be heard from the speaker. Use the volume control to adjust the volume of the earphones. Using the tuner Tuning while watching the meter (Meter mode) 1 Connect your instrument cable or contact mic to the TM-40's INPUT jack. If you want to use the internal mic, don't plug anything into the INPUT jack. The internal mic can't be used when a plug is connected to the INPUT jack. 2 Press the [TUNER ON] switch. You will enter the Meter mode, and the tuning meter will appear in the display. The upper part of the display will indicate “TUNER,” and the most recently specified calibration (reference pitch) is shown at the left. Precautions Location Using the unit in the following locations can result in a malfunction. • In direct sunlight • Locations of extreme temperature or humidity • Excessively dusty or dirty locations • Locations of excessive vibration • Close to magnetic fields Power supply Be sure to turn the power switch to OFF when the unit is not in use. Remove the battery in order to prevent it from leaking when the unit is not in use for extended periods. Interference with other electrical devices Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios and televisions. Handling To avoid breakage, do not apply excessive force to the switches or controls. Care If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use liquid cleaners such as benzene or thinner, or cleaning compounds or flammable polishes. Keep this manual After reading this manual, please keep it for later reference. Keeping foreign matter out of your equipment Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. Be careful not to let metal objects get into the equipment. THE FCC REGULATION WARNING (for U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc...