Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
They are available in singlemode or multimode versions. The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11. Optical fiber interconnection between transmitter and receiver Number/type................................ 1 or 2 fiber optic Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication. Connectors..................................... 2 LC connectors Operating distance Singlemode......................... 30 km (18.75 miles) with singlemode (SM) cables with a FOX 500 DVI SM Multimode.......................... 300 m (985') with 62.5 ^m multimode (MM) cables with a FOX 500 DVI MM 1 km (3280') with 50 ^m multimode (MM) cables with a FOX 500 DVI MM 2 km (6561') with 50 ^m 2000 MHz bandwidth laser optimized multimode cable with a FOX 500 DVI MM Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Nominal peak wavelength........... 850 nm for FOX 500 DVI MM, 1310 nm for FOX 500 DVI SM Data rate......................................... 4.25 Gbps Transmission power Singlemode......................... -5 dBm, typical Multimode.......................... -5 dBm, typical Maximum receiver sensitivity Singlemode......................... -18 dBm, typical Multimode.......................... -12 dBm, typical Optical loss budget Singlemode......................... 13 dB, maximum Multimode.......................... 7 dB, maximum Video Resolution range........................... Single link DVI and HDMI digital video signals are supported, including 640x480 @ 60 Hz through 1600x1200 @ 60 Hz, and also HDTV signals at 480p, 720p, 1080i, and 1080p. Higher resolutions up to 1920x1200 @ 60 Hz, undersampled *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. The FOX 500 DVI Series can be used to distribute HDMI signals if you use a DVI-to-HDMI adapter. However, when using HDMI signals, the FOX units do not transmit audio and CEC signals. Formats........................................... RGB and YCbCr digital video Standards........................................ DVI 1.0, HDMI 1.2 Video input and loop-through — transmitter (FOX 500 DVI Tx) Number/signal type..................... 1 DVI-D (or HDMI*) input 1 DVI-D (or HDMI*) loop-through Connectors..................................... 1 female DVI-I for input 1 female DVI-I for loop-through Nominal level................................ 0.8 Vp-p Impedance...................................... 100 ohms dsN dsN Extron FOX 500 DVI Tx, FOX 500 DVI Rx Fiber Optic Transmitter-Receiver Pair • Specifications 1 Header, cont'd Video output — receiver (FOX 500 DVI Rx) Number/signal type..................... 1 DVI-D (or HDMI*) Connectors ..................................... 1 female DVI-I Nominal level................................ 0.8 Vp-p Impedance...................................... 75 ohms Video delay.................................... 1-2 frames Audio Gain Range.................................. Adjustable, -18 dB to +10 dB Default Captive screw connector Unbalanced output: -6 dB; balanced output: 0 dB Mini stereo jack.......... Unbalanced output: 0 dB Frequency response...................... 20 Hz to 20 kHz, ±0.5 dB THD + Noise.................................. 0.10% @ 1 kHz at nominal level S/N.................................................. >80 dB at maximum output (unweighted) CMRR.............................................. 65 dB @ 20 Hz to 20 kHz Audio bits per sample........
Эта инструкция также подходит к моделям:Ресиверы и усилители - Fiber Optic Transmitter-Receiver Pair FOX 500 DVI Tx (67.81 kb)