Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
1 set of proprietary analog signals Connectors..................................... 1 RJ-45 female jack or 1 RJ-45 female jack on a 3" (7.6 cm) pigtail Video input Number/signal type VTT001 series..........................................RGBHV, RGBS VTR001 series..........................................1 set of proprietary analog signals from a VTT001 model or an IN1404XT Connectors VTT001 series..........................................(1) 15-pin HD female VTR001................................................................1 RJ-45 female jack VTR001 MAAP/AAP..............1 RJ-45 female jack on a 3" (7.6 cm) pigtail Nominal level................................................................0.7 Vp-p for RGB Minimum/maximum levels................Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain Impedance............................................................................75 ohms Horizontal frequency........................................15 kHz to 130 kHz Vertical frequency....................................................30 Hz to 150 Hz Video output Number/signal type VTT001 series..................... 1 set of proprietary analog signals VTR001 series..................... RGBHV, RGBS Connectors VTT001................................ 1 RJ-45 female jack VTT001 MAAP/AAP....... 1 RJ-45 female on a 3" (7.6 cm) pigtail VTR001 series..................... (1) 15-pin HD female Nominal level................................ 0.7 V p-p for RGB Minimum/maximum levels........ 0.3 V to 1.45 Vp-p Impedance...................................... 75 ohms Maximum resolution.................... 1600x1200 Refer to the user's manual for the maximum distances recommended for specific resolutions. Sync Input type VTT001 series..................... RGBHV, RGBS Output type VTR001 series..................... RGBHV, RGBS Input level...................................... 2.0 V to 5.5 Vp-p with ±0.2 VDC offset max. Output level................................... 3.0 V to 4.0 Vp-p Input impedance........................... Hi-Z Output impedance........................ 75 ohms Max. propagation delay............... 580 ns Max. rise/fall time........................ 45 ns Polarity............................................ Negative General Recommended cable type............ CAT 5/5E/6 (shielded or unshielded) Power.............................................. Supplied by an external power supply External power supply................. 100 VAC to 240 VAC, 50/60 Hz, external; to 9 to 12 VDC, 2 A, regulated Power input requirements........... 12 VDC, 0.1 A for VTT 12VDC, 0.15 A for VTR Extron VTT001 Twisted Pair Transmitter, VTR001 Twisted Pair Receiver • Specifications 1 Specifications — VTT001 Series, VTR001 Series, cont'd Temperature/humidity................ Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing Cooling...............
Эта инструкция также подходит к моделям:Ресиверы и усилители - Twisted Pair Transmitter VTT001 (46.29 kb)