Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. - Increase the distance between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. -You are cautioned that changes or modif cations not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 2 FEATURES Features • Converts DVI to DisplayPort using the Mini DisplayPort connector interface • Supports video at 1920 x 1200 @ 60Hz resolution • True pixel-to-pixel signal conversion without scaling • Built-in EDID support • Durable and simple design aesthetically pairs well with many displays Package Includes (1) DVI to Mini DisplayPort Converter (1) 3-Foot DVI-D Cable (M-M) (1) 5V DC Universal Power Supply (1) User Manual 3 PANEL LAYOUT Front Panel 1 Back Panel 234 5 4 PANEL DESCRIPTIONS 1 DVI-D Input Connector This input will support one DVI-D type source device. The DVI to Mini DP Converter will convert this signal to a DisplayPort compatible signal. 2 Service Port This port is for factory use only. 3 Power LED Status Indicator This LED will be active while power is being supplied to the DVI to Mini DP Converter via the included power supply. 4 Mini DisplayPort Output Connector This input will support one Mini DisplayPort type output device. The DVI to Mini DP Converter will convert an input DVI signal and convert it to a DisplayPort compatible signal. NOTE: A standard Displayport device can easily be connected by using a Mini DisplayPort to DisplayPort adapter cable. 5 5V DC Power Connector This input will accept 5V DC from the included power supply. NOTE: Multiple power adapter plugs (blades) are supplied. Please refer to your region’s power standards to determine which power adapter blade is appropriate for use with the DVI to Mini DP Converter. Supplied Adapter Blades: US: United States UK: United Kingdom EU: Europe AU: Australia 5 CONNECTING THE DVI TO MINI DP CONVERTER How to Connect the DVI to Mini DP Converter 1. Connect a DVI source device to the DVI input connector on the DVI to Mini DP Converter using the supplied DVI cable. 2. Connect a Mini DisplayPort display to the Mini DisplayPort output connector on the DVI to Mini DP Converter using a user/device supplied Mini DisplayPort cable. 3. Locate the appropriate power adapter connector (blade) for your region and attach this to the included power supply. The following power adapter blades are supplied: US: United States UK: United Kingdom EU: Europe AU: Australia To connect power connector blade to the power supply please follow these steps: 1. Locate the side of the power supply with the exposed metal contacts. This is the side that will accept the power connector blade. 2. Each power connector blade has a small notch on one end and an indent on the opposite side. Insert the notched end of the power connector blade into the top portion of the opening on the power supply. The notch on the power connector blade should slide into a slot inside the opening on the power supply. 3. Apply pressure to the opposite end of the power connector blade, pressing it into the power supply until it clicks into place. Please ensure that the attachment is secure and does not come loose when pulling the power connector blade away from the power supply. NOTE: To disconnect the power connector blade from the power supply, simply press and pull the spring loaded locking tab toward the portion of the housing where the cable connects to the power supply. The power connector blade should easily pull away from the power supply. 4. Connect the power connector blade of the power supply to an open wall power socket. 5. Connect the opposite end of the power supply cable to the 5V DC power connector on the DVI to Mini DP Converter. The power LED should become active. 6 SPECIFICATIONS Input Connector .................................................................................. (1) DVI-D Output Connector ............................................................... (1) Mini DisplayPort Power Indicator ......................................................