Войти:
Оценок - 3, средний балл: 4 ( )

Инструкция по эксплуатации Gefen, модель EXT-GSCALER-PRO EXT-GSCALER-PRO

Производитель: Gefen
Размер: 199.56 kb
Название файла: EXT-GSCALER-PRO.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Output - Cycles through the available output resolutions. Please see the section A/V Scaler Pro CONFIGURATION / Output on page 8 for the output resolution table. 2. Input - Cycles though all of input sources. The selectable inputs are Composite, S-Video, Component, HDMI 1, and HDMI 2. 3. Power - Turns the unit on and off (standby). 4. Exit - Exits the current menu option and menu system. 5. Menu - Displays the menu system for adjustment of options. 6. Navigation Keys - These include up, down, left, and right buttons for navigating the menu system. 7. The OK button will select specific menu options for adjustment and will also confirm/cycle-through selections (Output/Input). 8. Reset - Resets the input and output resolutions to factory default. 9. Auto Adjust - Sets the display for optimal resolution and aspect ratio based on the display’s EDID information and the currently selected sources output resolution. 6 OPERATING THE A/V SCALER PRO Entering the Menu System Pressing the Menu button on the included RMT-SR-IR remote control will display the GUI (graphical user interface) for adjustment options. The GUI is overlaid onto the outgoing video to the display. Therefore, the selected source must be outputting a compatible resolution for viewing on the display. If video is not visible on the display, the GUI will also fail to be displayed. To correct this, please follow the steps below. 1. Verify that the source is on and outputting a video signal. 2. Verify that the RMT-SR-IR remote channel is in the default position (page 13). 3. Verify that the A/V Scaler Pro is selected to the chosen source. 4. Press the Output button on the RMT-SR-IR remote control to cycle through output resolutions until video is displayed. Please see page 8 for a listing of the available output resolutions and cycle order. Navigation Use the directional buttons to navigate the menu system. Press the OK button to enter a sub category and also to select a menu item for adjustment. Use the Left and Right buttons to adjust the selected menu item. Press the EXIT or OK button to return to the previous menu. Use the LEFT and RIGHT buttons to adjust selected options. Pressing the EXIT button while in the main menu will exit out of the menu system. MAIN MENU The following are the main menu options. Use the UP and DOWN buttons to choose your desired subcategory and press OK to enter it. VIDEO COLOR OUTPUT OSD AUDIO INFORMATION VIDEO Picture Mode Preset and user configurable settings for different viewing scenarios. Preset settings will not allow user adjustment. Only the USER option will allow customized video settings. The USER settings are saved. Options: • Standard - useful for general content • Movie - useful for dimly lit environments • Vivid - useful for accentuating colors for a more vibrant image • User - user confi gurable settings NOTE: User settings are saved. However, user settings for the digital inputs (HDMI 1 and 2) are linked and user settings for the analog inputs (Composite, S-Video, and Component) are linked. i.e. adjustments to video user settings made on HDMI 1 will be reflected in HDMI 2. 7 OPERATING THE A/V SCALER PRO VIDEO CONTINUED Press OK to begin adjusting settings. Use the LEFT and RIGHT buttons to change settings. Press the OK button once the desired settings are made. Contrast Adjusts the contrast in increments of 1 on a scale of 1 to 100 (default 50). Brightness Adjusts the brightness in increments of 1 on a scale of to 100 (default 50). Hue Adjusts the hue in increments of 1 on a scale of 1 to 100 (default 50). Saturation Adjusts the saturation in increments of 1 on a scale of 1 to 100 (default 50). Sharpness Adjusts the sharpness in increments of 1 on a scale of 1 to 100 (default 50). Scale Adjusts the aspect ratio of the video. Options: Full, Overscan, Underscan, Letterbox Underscan, Pan Scan Underscan, Letterbox Full, Pan Scan Full 4:3 Source 16:9 Source Full - Stretches the image to fill the screen Example Example Overscan - Stretches the image to fullscreen and just beyond the border of the display Underscan - Stretches the image to fullscreen and just within the border of the screen Letterbox Underscan - Stretches the image to 16:9 aspect ratio with underscan Pan Scan Underscan - Stretches the image to 4:3 aspect ratio with underscan Letterbox Full - Stretches the image to 16:9 aspect ratio without underscan Pan Scan Full - Stretches the image to 4:3 aspect ratio without underscan N.R. (Noise Reduction) - Only for Composite and S-Video Inputs Reduces video noise inherent in analog video signals. Options: • Off - default • Low • Middle • High 8 OPERATING THE A/V SCALER PRO VIDEO CONTINUED H-Pos (Horizontal Position) Adjusts the image’s horizontal position on the screen. • Adjusts in increments of 1 on a scale of 1 to 100 (default is 50) V-Pos (Vertical Position) Adjusts the image’s vertical position on the screen. • Adjusts in increments of 1 on a scale of 1 to 100 (default is 50) Y/C Separation - Only for Co...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории