Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
There are four modes with matching graphic equalization modes. Equalization modes are selected automatically and can also be selected or turned off to suit your preference. Press one of the DSP buttons (DANCE:, LIVE, HALL or ARENA). The selected mode name appears on the display for two seconds, and the selected DSP and matching GEQ modes on the display are enclosed with parentheses. DANCE ||lliÉpf rIALL Selected mode- '-TiTiT HALL ARENA : ■; ; ; i\ i i ! JJ i 1 1 s«! L. L. Selected DSP mode Matching GEQ mode Mjjll|[ROCK7l To cancel the selected mode Press the selected button again. “GEQ oFF” appears on the display. To select with the remote control Press the GEQ button repeatedly until the desired equalization mode is displayed. When the music source is monaural Select LIVE to obtain a simulated stereo effect. When DANCE or HALL is selected, no sound will be heard from the surround speakers. To cancel the selected mode Press the selected button again. “DSP oFF” appears on the display. Even if canceling the selected DSP mode, the matching or selected GEQ mode still remains. While the DSP surround system is off, no sound is heard from the surround speakers. To select with the remote control Press the DSP button repeatedly until the desired DSP mode is displayed. To adjust the volume of the surround speakers Press the MANUAL SELECT button once. “SUR” is displayed for four seconds. Press the UPA or DOWNV button while “SUR” is displayed. Note that the Dolby Pro Logic surround speakers level is also changed (see page 13). nrsTS The DSP system is automatically canceled when the DOLBY PRO LOGIC is turned on. ENGLISH 8 BASIC OPERATIONS SELECTION OF AUDIO/VIDEO RECORDING AN AUDIO SOURCE SOURCE - 1 Select the program source. Press one of the FUNCTION buttons or the TAPE MONITOR button. To listen to or watch The button pressed Tape TAPE MONITOR Radio TUNER Record PHONO Television, etc. AUX/TVa) Compact disc CD Video (VCR or LD) VIDEO 1, VIDEO 2a), VIDEO 3 MD VIDEO 2a) a>: For selecting AUX/TV, or VIDEO 2/LD/MD, see “To change a displayed name for the AUX/TV button and VIDEO 2 button” of “BEFORE OPERATION” (see page 6). 1 Select the program source to be recorded. Press one of the FUNCTION buttons. 2 Set the tape deck or MD recorder to the recording mode. 3 Start the selected program source. To monitor recorded sound during recording (when the connected tape deck is a three-head system) Press the TAPE MONITOR button. “TAPE ON” appears on the display for four seconds, and then the source name selected in step 1 comes back on. To cancel the tape monitor, press it again so that “TAPE oFF” appears. NOTE Any sound control except the BBE system has no effect on recording (see page 7). NOTE When using a turntable with a built-in equalizer amplifier, set the switch of the equalizer amplifier to off. See the instructions of the turntable for further information. 2 Start the selected program source. 3 Adjust the sound. About the video source to the monitor or TV Selected VIDEO source ill III ROCK Ena pop ^dusre ...... BGM ■ i......Г: '-'I ' ARENA !.......U V1: VIDEO 1, V2: VIDEO 2, V3: VIDEO 3 The selected video source is indicated on the display and the video signal through the MONITOR VIDEO OUT jack is output on the TV. 9 ENGLISH RADIO RECEPTION MANUAL TUNING DIRECT TUNING Press the TUNER button repeatedly to select the desired band. j ► FM ► AM —j When the TUNER button is pressed while the power is off, the power is turned on directly. Press the UPA or DOWNV button to select a station. Each time the button is pressed, the frequency changes. When a station is received, “TUNE" is displayed for two seconds. During FM stereo reception, ((ia»i>) is displayed. ml HALL . ARENA ROCK 1 When you know the frequency of the desired station, you can tune in directly to the station. 1 Press the TUNER button to select a band. 2 Press the TUNER button and hold it down until flashes on the display (Direct Tuning Mode). tWJCF LIVE HALL AH=NA Î / }/ 'I': ^ l# Press the appropriate numbered buttons to tune in to the desired station. Example: To tune in to 106.50 MHz, press 1, 0, 6, 5 and 0 buttons. To tune in to 95.2 MHz, press 9, 5, 2 and Cl buttons. To search for a station quickly (Auto Search) Keep the UPA or DOWNT button pressed until the tuner starts searching for a station. After tuning in to a station, the search stops. To stop the Auto Search manually, press the UPA or DOWNT button. • The Auto Search may not stop at stations with very weak signals. When an FM stereo broadcast contains noise Press the MONO TUNER button on the remote control so that “MONO” appears on the display. Noise is reduced, although reception is monaural. MONO ! 1 J l i ! ¡ . . ■ M0N° I; To cancel the Direct tuning mode Press the UPA or DOWNT button. When using the remote control Carry out steps 1 and 2 above, and press the numbered buttons on the remote control to t...