Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.” Owner’s record For your convenience, record the model number and serial number (you will find them on the rear of your unit) in the space provided below. Please refer to them when you contact your Aiwa dealer in case of difficulty. Model No. Serial No. (Lot No.) AV-D25 Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below. Installation 1 Water and moisture — Do not use this unit near water, such as near a bathtub, washbowl, swimming pool, or the like. 2 Heat — Do not use this unit near heat sources, including heating vents, stoves, or other appliances that generate heat. It also should not be placed in temperatures less than 5°C (41”F) or higher than 35°C (95”F). 3 Mounting surface — Place the unit on a flat, even surface. 4 Ventilation — The unit should be situated with adequate space around it so that proper heat ventilation is assured. Allow 10 cm (4 in.) clearance from the rear and the top of the unit, and 5 cm (2 in.) from each side. -Do not place the unit on a bed, rug, or similar surface that may block the ventilation openings. -Do not install the unit in a bookcase, cabinet, or airtight rack where ventilation may be impeded. 5 Objects and liquid entry —Take care that objects or liquids do not get inside the unit through the ventilation openings. 6 Carts and stands — When placed or mounted on a stand or cart, the unit should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the unit or m 3 A~ cart to overturn or fall. 7 Wall or ceiling mounting —The unit should not be mounted on a wall or ceiling, unless specified in the Operating Instructions. Electric Power 1 Power sources — Connect this unit only to power sources specified in the Operating Instructions, and as marked on the unit. 2 Polarization — As a safety feature, some units are equipped with polarized AC power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug over and try again. If it is not still inserted easily into the outlet, please call a qualified service technician to service or replace the outlet. To avoid defeating the safety feature of the polarized plug, do not force it into a power outlet. 3 AC power cord -When disconnecting the AC power cord, pull it out by the AC power plug. Do not pull the cord itself. -Never handle the AC power plug with wet hands, as this could result in fire or shock. -Power cords should be firmly secured to avoid being severely bent, pinched, or walked upon. Pay particular attention to the cord from the unit to the power socket. -Avoid overloading AC power plugs and extension cords beyond their capacity, as this could result in fire or shock. 4 Extension cord — To help prevent electric shock, do not use a polarized AC power plug with an extension cord, receptacle, or other outlet unless the polarized plug can be completely inserted to prevent exposure of the blades of the plug. 5 When not inuse — Unplug the AC power cord from the AC power outlet if the unit will not be used for several months or more. When the cord is plugged in, a small amount of current continues to flow to the unit, even when the power is turned off. ENGLISH Outdoor Antenna 1 Power lines — When connecting an outdoor antenna, make sure it is located away from power lines. 2 Outdoor antenna grounding — Be sure the antenna system is properly grounded to provide protection against unexpected voltage surges or static electricity build-up. Article 810 of the National Electrical Code, ANS1/NFPA70, provides information on proper grounding of the mast, supporting structure, and the lead-in wire to the antenna discharge unit, as well as the size of the grounding unit, connection to grounding terminals, and requirements for grounding terminals themselves. Antenna Grounding According to the National Electrical Code ) (NEC ART 250 PART H) NEC-NATIONAL ELECTRICAL CODE Maintenance Clean the unit only as recommended in the Operating Instructions. Damaue Reauirinq Service Have the unit serviced by a qualified service technician if: -The AC power cord or plug has been damaged -Foreign objects or liquid have gotten inside the unit -The unit has been exposed to rain or water -The unit does not seem to operate normally -The unit exhibits a marked change in performance -The unit has been dropped, or the cabinet has been damaged DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF. Check your unit and accessories AV-D25 Stereo receiver Remote control TABLE OF CONTENTS PRECAUTIONS ................................................................... 1 PREPARATIONS CONNECTIONS .........................................................