Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
When the power is turned on, the “SYSTEM CHECK” appears in the display, then the unit returns to the clock display mode. The system check starts within the unit. When the system check is complete, press the [SRC] button again. Selecting a mode 1. Press the [SRC] button to change the operation mode. 2. Each time you press the [SRC] button, the operation mode changes in the following order: Radio . (Satellite radio) . CD/MP3/WMA . (iPod BB) . (CD changer) . (DVD changer) . (TV) . AUX . Radio... . External equipment not connected with CeNET is not displayed. Adjusting the volume 1. Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume. . The volume level is from 0 (minimum) to 33 (maximum). Switching the display Press the [DISP] button to select the desired display. . Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment. . If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display. For details, refer to the subsection “Turning the screen saver function on or off” in section “Operations Common to Each Mode”. . When the power is turned off Each time you press the [DISP] button, the clock time appears or disappears in the display. 10 DXZ475MP Basic Operations Sound Adjustment You can adjust a sound effect or tone quality to your preference. To change sound setting 1. Press the [ ] button to switch to the sound adjustment selection display. . The factory default sound setting is “ZEHCR”. 2. Then press the [x] or [v] button to select the sound adjustment mode. Each time you press the [x] or [v] button, the sound adjustment mode changes as following order: “Z-EHCR” - “BASS” - “TREBLE” - “BALANCE” - “FADER” - “REAR/S-W” - “S-W VOL” - “HPF” 3. Press the [w] or [z] button to adjust the selected audio mode. . In the case of display blinking “ENT”, you can press the [ ] button to adjust the setting value. 4. After completing settings, press the [ ] button to return to the previous mode. . Setting the Z-Enhancer This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer. . The factory default setting is “OFF”. 2-1. Select “Z-EHCR”. 3-1. Each time you press the [w] or [z] button, the tone effect changes in the following order: “EXCITE” - “IMPACT” - “B-BOOST” - “OFF” EXCITE : bass and treble emphasized mid deemphasized IMPACT : bass and treble emphasized B-BOOST : bass emphasized OFF : no sound effect When “EXCITE” is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the bass and treble in the range of +3 to –3. . The factory default setting is “0”. 3-4. Press the [ ] button to return to previous mode. When “IMPACT” is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the bass and treble in the range of +3 to –3. . The factory default setting is “0”. 3-4. Press the [ ] button to return to previous mode. When “B-BOOST” is set: 3-2. Press the [ ] button. 3-3. Press the [w] or [z] button to adjust the bass in the range of +3 to –3. . The factory default setting is “0”. 3-4. Press the [ ] button to return to previous mode. . Adjusting the bass This adjustment can be performed only when the Z-Enhancer is set to “OFF”. 2-1. Select “BASS”. 3-1. Press the [w] or [z] button to adjust the bass. . The factory default setting is “0”. (Adjustment range: +8 to –8) . Adjusting the treble This adjustment can be performed only when the Z-Enhancer is set to “OFF”. 2-1. Select “TREBLE”. 3-1. Press the [w] or [z] button to adjust the treble. . The factory default setting is “0”. (Adjustment range: +7 to –7) . Adjusting the balance 2-1. Select “BALANCE”. 3-1. Press the [w] or [z] button to adjust the balance of the right and left speakers. . The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12)) English DXZ475MP 11 Basic Operations English . Adjusting the fader 2-1. Select “FADER”. 3-1. Press the [w] or [z] button to adjust the balance of the rear and front speakers. . The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12)) . Setting the subwoofer You can set the low pass filter of subwoofer. 2-1. Select “REAR/S-W”. 3-1. Each time press the [w] or [z] button to select the setting, the setting changes in the following order: “LPF 120” - “LPF 80” - “LPF 50” - “REAR” . The factory default setting is “REAR” (rear). . Adjusting the subwoofer output volume You can adjust the volume output from the unit’s subwoofer output terminal. This adjustment can be performed only when the “REAR/S-W” is set to “LPF 120”, “LPF 80” or “LPF 50”. 2-1. Select “S-W...
Эта инструкция также подходит к моделям:Ресиверы и усилители - DXZ475MP (2.1 mb)
Ресиверы и усилители - DXZ475MP (2.1 mb)