Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
2004). 2-1 2. OPERATION 2.1 Operating Controls ENT MENU ESC DIM LIST PRINT Turns the power on/off. Opens the PRINT options. Opens the LIST options. Opens menu/Returns to the previous display. Cursor pad -Shifts the cursor and display. -Selects items on menus. Adjusts the panel and LCD dimmer. +: Raises the setting. - : Decreases the setting. Registers items on menus. Display unit, front view 2.2 Turning the Unit On/Off Press the key to turn the unit on. A beep sounds and the equipment shows the start up display, where the ROM and RAM are checked for proper operation and the program no. is displayed. The results of the check are shown as OK or NG (No Good). When the results are OK, the list display is shown after five seconds after completion of the check, with frequency last used before turning the power off. XX: Program version No. ROM : OK .. RAM : OK Program No. 0850193-XX FURUNO ELECTRIC CO., LTD. DUAL CHANNEL NAVTEX NX-700 2. OPERATION At the default setting, the equipment functions as below; When the results of the check are OK, ALL MESSAGE display for 518 kHz appears. This screen shows all messages received in 518 kHz. You can switch 518 kHz (International message) and 490 kHz (local message) to display. The NX-700A is preset to print all received message out. All message display (518 kHz) Note 1: To display all received messages in 490 kHz, press < or >. Note 2: To cancel the printing all received messages out, see page 2-11. To turn the power off, press the key again. Note: If NG appears for any test, try to press any key to go to the next stage. The equipment, however, may not be operated properly. Contact your dealer if the problem persists. 2.3 Adjusting LCD Dimmer You can adjust LCD and panel dimmer with the + DIM – key. The adjustment range is 0 (dark) to 9 (bright). +: Raises the dimmer. -: Decreases the dimmer. 2. OPERATION 2.4 Confirming the New Message When you receive a new message, do one of the following depending on message received. SAR (Search and Rescue) message 1. When an SAR message is received, the audible alert sounds and details for the SAR message appear. Icon for SAR message 2. Press any key other than key to silence the alarm. Other messages 1. When a message other than an SAR message is received, the display shows one of the following windows. Received new int'l msg. Received new local msg. Display new msg ? Display new msg ? Yes No Yes No International message Local message 2. If you want to read the message immediately, press < to choose “Yes” and then press the ENT key to display the message To read the message later, choose “No”, and then press the ENT key to close the window. 2. OPERATION 2.5 Sample Messages Press ^ or Ў on the cursor pad to choose a message, and then press the ENT key to show the detailed information for that message. The message list and detailed message displays can be switched by pressing the ENT key. Category of messages (paragraph 2.11) New OldOperation guide Frequency (paragraph 2.9) Station ID, type of message, serial No. (two digits, paragraph 1.3) Status icon (paragraph 2.14) Error rate No. of saved messages Receiving date ENT key Message icon (paragraph 2.14) Message list Detailed message Note 1: The operation guide at the bottom of screen shows the functions of the keys available for use with the current screen. Note 2: The character size can be changed. For detail, see page 2-18. Key Display mode Function ^Ў List Scrolls the list. Detailed Scrolls the message. <> List Switches the international and local lists. Detailed Shows the newer (<) or older (>) message. MENU List Shows the main menu. Detailed ENT List Shows the detailed message selected. Detailed Shows the message list. LIST List Shows the list options. Detailed PRINT List Shows the print options. Detailed 2. OPERATION 2.6 Choosing the Receive Mode The NAVTEX menu allows you to select what station to receive, automatically, manually. The Auto mode requires navigation data, and stations are automatically selected according to the distance between own ship and NAVTEX stations. If navigation data is not input, all stations are selected. The manual mode lets you freely stations to receive. The INS mode allows you to set the station, message and local channel from the external equipment (ex. Integrated Navigation System, using NMK sentence) connected. 1. Press the MENU/ESC key to show the main menu. Menu NAVTEX System Display Service Main menu 2. Press ^ or Ў to choose NAVTEX. 3. Press the ENT key or > to open the NAVTEX menu. NAVTEX Receive Mode Manual Local Channel 490kHz Auto Print All Rcv Station & Msg User Select Station & Msg NAVTEX menu 4. Press ^ or Ў to choose Receive Mode, and then press the ENT key or > to show the receive mode options. INS Auto Manual Receive mode options 5. Press ^ or Ў to choose INS, Auto or Manual as appropriate, and then press the ENT key. 6. Press the MENU/ESC key several times to close the menu. 2. OPERATION 2.7 Choosing the Local Frequency You can cho...