Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Each channel is rated for 10 Amps or 1/2 HP, with a total module rating of 16 Amps. The CLX-1MC4 occupies a single module space in any CAEN automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-1MC4 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLX modules are controlled by the PAC2 and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included). SPECIFICATIONS Load Ratings_ Motor Control Channels: 4 Per Channel: 10 Amps, 1/2 HP Module Total: 16 Amps Load Types: 3-Wire bidirectional motors Power Requirements_ 120 Volts AC, 60Hz, single-phase Connections on module_ Module Interconnect: (2) 5-pin 0.156 inch headers, Cresnet/Override interconnect ports Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLX-Series module using interconnect cable provided Connections via CLT terminal block (sold separately)_ LINE: (1) DIN rail terminal block, black, line power input OPEN 1 - 4: (4) DIN rail terminal blocks, red Channel outputs, "open" terminals CLOSE 1 - 4: (4) DIN rail terminal blocks, blue Channel outputs, "close" terminals N IN: (1) DIN rail terminal block, white, line input neutral N OUT 1 - 4: (4) DIN rail terminal blocks, white, channel output neutrals OPEN 1 CLOSE 1 OPEN 2 CLOSE 2 OPEN 3 CLOSE 3 OPEN 4 CLOSE 4 N IN N OUT 1 N OUT 2 N OUT3 ■ ■№■ 1 MODULE o CREsmoN ; kf Shown with CLT-1MC4 Terminal Block Buttons SETUP: Used for TSID LED Indicators PWR: (green) Indicates line power is applied to the LINE terminal NET: (yellow) Indicates communication with the control system 1 - 4: (red x8) Indicates open or closed state of each channel SETUP: (red) Indicates unit is in setup/manual mode Environmental Temperature: 32° to 104°F (0° to 40°C) Humidity: 10% to 90% RH (non-condensing) Heat Dissipation: 15 BTU/Hr + (0.44 BTU/Hr x Load Current in Amps), 22 BTU/Hr at maximum load Enclosure Gray metal with black heat sink, surface mount module with (2) integral mounting flanges. occupies 1 module space in any CAEN enclosure Dimensions Height: 7.59 In (19.27 cm) Width: 6.92 In (17.57 cm) Depth: 3.43 In (8.70 cm) Weight_ 3.00 lb (1.36 kg) AVAILABLE ACCESSORIES CAEN Automation Enclosures CLT-1MC4 Terminal Block Crestron Electronics, Inc. 15 Volvo Drive l Rockleigh, NJ 07647 Tel: 800.237.2041 /201.767.3400 l Fax:201.767.1903 Specifications subject to change without notice. Doc.4844 12/07 ©2007 Crestron Electronics, Inc. All brand names, product names and trademarks are the property of their respective owners. www.crestron.com...