Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
4 Select a Resolution setting that gives you the best picture (1080i, 720p, or 480p). Connecting to a TV with a component connector (YPbPr) 1 Connect your indoor or outdoor antenna to the RF Input (labeled AIR 75 ohm). 2 Insert the red, green, and blue cables into the Y, Pb, and Pr connectors (respectively) in the Component Out section. 3 Insert the white and red audio cables into the L and R Audio connectors (respectively) of the Component Out section. 4 Insert the other ends of the red, green, and blue cables into the YPbPr Component In connectors of your TV. 5 Insert the other ends of the white and red audio cables into the L and R In connectors of your TV or audio receiver. Make sure they correspond with your YPbPr inputs. 6 Make sure the DTV Out Select switch has YPbPr selected. 7 Select a Resolution setting that gives you the best picture (1080i, 720p, or 480p, 480i). 6 Setup Connecting to an analog TV (composite) 1 Connect your indoor or outdoor antenna to the RF Input (labeled AIR 75 ohm). 2 Insert the yellow cable into the Video connector in the Monitor Out section. 3 Insert the white and red audio cables into the L and R Audio connectors of the Monitor Out section. 4 Insert the other end of the yellow cable into the Composite In connector of your TV. 5 Insert the other ends of the white and red audio cables into the L and R In connectors of your TV or audio receiver. Make sure they correspond with your composite input. 6 Select 480i for your Resolution setting. Connecting a splitter for Picture-In-Picture TVs To use the Picture-in-picture feature on your TV, use a splitter (not included) to connect your HDTV Tuner. 1 Connect your indoor or outdoor antenna to the splitter. 2 Connect one cable from the splitter to the RF Input (labeled AIR 75 ohm) on the HDTV Tuner. 3 Connect another cable from the splitter to the RF connector on your TV. Connecting audio equipment This connection enables Dolby Digital* quality sound, when available. Use with an external digital audio receiver decoder. See “Digital Output” on page 20 for configuring your HDTV Tuner to output the appropriate audio format for your receiver. Insert the cable from the Digital Audio Input of the audio receiver into the Digital Audio Out connector on your HDTV Tuner. Refer to your TV documentation to locate the Digital Audio Input connector. *Manufactured under license from Dolby Laboratories. “Dolby” and the Double-D symbol are trademarks of Dolby Laboratories. Setup 7 Using the HP HDTV Tuner Front Panel Controls • Power button: Press to turn the power on and off. • Menu button: Press to display the On-Screen Menu. • Power LED: A red light appears when the power is on. • Arrow and Enter buttons: Press to navigate the On-Screen Menu. • DTV LED: A green light appears when you are on a channel receiving a digital signal. • Info button: Press to display the following information: current HDTV Tuner settings, the channel number, captioning settings, the program title, the time, the program duration, the picture grade, MTS settings, and ratings. • Clear button: Press to remove the On-Screen Menu from your display. 8 Using the HP HDTV Tuner Using the Remote Control Identifying the remote control buttons Button Description Power Press Power once to turn the HDTV Tuner on or off. Number keys Use the keypad numbers (0–9) to directly select channels. Help Press when inside the On-Screen Menu. Displays a help window describing the current feature. Pre-CH Press Pre-CH (previous channel) once to recall the last channel. Fav-CH Press Fav-CH (favorite channel) once to view the next channel assigned as a favorite channel. MTS Press MTS to select stereo, mono, or SAP (second audio program) for the TV sound. Caption Press Caption to scroll through and select the CC1 to CC4 (analog) or Service 1 to Service 6 (digital) caption options. Guide Press Guide to display the Electronic Program Guide (EPG). Info Press Info to display current HDTV Tuner settings, the channel number, captioning settings, the program title, the time, the program duration, the picture grade, MTS settings, and ratings. CH Use CH+ (or CH–) to select the next higher (or lower) channel. Arrow buttons Use the arrow buttons to move the cursor in a program guide or in menu screens. (Select) Press (Select) once after entering a channel number. Use (Select) in the On-Screen Menu to choose your selection. Menu Press Menu to access the On-Screen Menu (OSM). Inside the OSM, pressing the Menu button takes you back one screen. Exit Press Exit to exit out of the selected OSM and return to your current channel. Aspect Press the Aspect button to select one of three screen formats. Still Press the Still button to pause a frame. The audio continues. Press Still again to undo the image pause. Signal Press the Signal button to view the signal strength or weakness of the current channel. Using the HP HDTV Tuner 9 Installing or replacing the remote control batteries When the remote control becomes less respon...