Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
• Multi-channel capability to monitor temperature in up to In this package you will find: 3 remote locations • Indoor and Remote temperature displays • Main unit (receiver) • Barometric pressure condition displayed in 3 trend • Remote sensor (transmitter) TS13 indicators -Rising, Steady and Falling • AC/DC Adapter • Color-animated weather forecast in 5 large graphic icons: Please keep this manual handy as you use your Sunny, Partly Cloudy, Cloudy, Rainy and Snowy • Precise time and date set via RF signal from US Atomic clock new item. It contains practical step-by-step instructions, • Calendar displays date with month & weekday in as well as technical specifications and precautions English, Spanish, French, German or Italian. you should know. • Dual crescendo alarm with snooze • Programmable low-temperature alarm warns about icy or inclement weather conditions • Blue Backlight • AC/DC adapter 12 43 KA C FB D E G I H DC 6V L M J 433 MHZ CABLE FREE A T O M I C C L O C K A COLOR WEATHER FORECAST WITH FOUR -LINE LCD DISPLAY Allows easy reading of color-animated weather forecast, indoor/outdoor temperature and calendar clock. B & F ALARM BUTTONS Sets an alarm and allows displaying alarm status. C CHANNEL SELECTOR Recalls the different remote sensor reading. D TOGGLE / + BUTTON: a) Selects the WEATHER FORECAST or BAROMETRIC PRESSURE CHART display mode. b) Selects the SINGLE or DEFAULT (TOGGLE) display modes. c) Increases altitude in ALTITUDE ADJUSTMENT mode. E UNIT / -BUTTON a) Selects pressure display in mB/hPa, inHg or mmHg. b) Selects altitude adjustment display in feet or meters. c) Decreases altitude in ALTITUDE ADJUSTMENT mode. G MODE BUTTON Changes display modes and confirms settings. H UP ( ) BUTTON Increases the setting. I DOWN ( ) BUTTON Decreases the setting. J SNOOZE/LIGHT BUTTON Activates snooze function and LCD backlight. K BATTERY COMPARTMENTS Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries. 43 KA C FB D E G I H DC 6V L M J 433 MHZ CABLE FREE A T O M I C C L O C K A COLOR WEATHER FORECAST WITH FOUR -LINE LCD DISPLAY Allows easy reading of color-animated weather forecast, indoor/outdoor temperature and calendar clock. B & F ALARM BUTTONS Sets an alarm and allows displaying alarm status. C CHANNEL SELECTOR Recalls the different remote sensor reading. D TOGGLE / + BUTTON: a) Selects the WEATHER FORECAST or BAROMETRIC PRESSURE CHART display mode. b) Selects the SINGLE or DEFAULT (TOGGLE) display modes. c) Increases altitude in ALTITUDE ADJUSTMENT mode. E UNIT / -BUTTON a) Selects pressure display in mB/hPa, inHg or mmHg. b) Selects altitude adjustment display in feet or meters. c) Decreases altitude in ALTITUDE ADJUSTMENT mode. G MODE BUTTON Changes display modes and confirms settings. H UP ( ) BUTTON Increases the setting. I DOWN ( ) BUTTON Decreases the setting. J SNOOZE/LIGHT BUTTON Activates snooze function and LCD backlight. K BATTERY COMPARTMENTS Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries. 65 THERMO – SENSOR MADE IN CHINA TM 1 A C B D F E REMOTE SENSOR L CLEAR REMOVABLE TABLE STAND Holds unit in upright position on the flat surface. M AC/DC 6V ADAPTOR Activates the Color LCD. FEATURES • Remote temperature transmission to the main unit via 433 MHz signal • Case can be wall mounted using built-in hanger • 100 feet transmission range without interference • LCD display of measured temperature • Temperature display selection in Fahrenheit or Celsius • Transmission channel selection BEFORE YOU BEGIN 1. We recommend using alkaline batteries for the main unit and remote sensor. 2. Avoid using rechargeable batteries. 3. Insert batteries before first use, matching the polarity as shown in the battery compartment. 4. Always install batteries in the remote sensor before the main unit. 5. Press RESET after each battery change, using paper clip or similar tool. 6. During an initial setup, place the main unit as close as possible to the remote sensor. 7. After reception is established (remote temperature will appear on the receiver’s display), position the remote sensor and main unit within the effective transmission range of 100 feet. NOTE: 1. Avoid setting the time and date on the main unit before the outdoor temperature is displayed. 2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned. A LED INDICATOR Flashes once when the remote sensor transmits a reading to the main unit. Flashes twice indicating low battery. B BATTERY COMPARTMENT Holds two AA-size batteries. C RESET Resets all previous settings. D CHANNEL SELECTOR Selects the desired channel before installing batteries. E WALL-MOUNT RECESSED HOLE Keeps the remote sensor on the wall. F °C/ °F SWITCH Selects the temperature display in Fahrenheit or Celsius. 65 THERMO – SENSOR MADE IN CHINA TM 1 A C B D F E REMOTE SENSOR L CLEAR REMOVABLE TABLE STAND Holds unit in upright position on the flat surface. M AC/DC 6V ADAPTOR Activates the Color LCD. FEATU...