Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
In this package you will find: • One main unit (receiver) • One remote sensor (transmitter) TS03 Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know. 4 PRODUCT OVERVIEW MAIN UNIT FEATURES • Wireless transmission of the temperature from the remote sensor to the main unit from up to 100 feet (30 meters) away • Remote temperature display • Indoor temperature display • Quartz clock • Calendar displaying date with month and day of the week in English, Spanish, French, German or Italian • Dual crescendo alarm with snooze feature • Programmable Freeze Pre-Alarm • Wall mount or desktop option • Low battery indicator 5 FRONT VIEW WEATHER AND PRECISE TIME INFORMATION IN A THREE -LINE LCD DISPLAY MODEMEM ALARM ON / OFF PM w MAX OUT N G C B E F D Time of Day with Seconds, Time of Day with the Day of the Week, Calendar and alarms -Weekly, Single and Pre-Alarm Indoor Temperature One-Channel Remote Temperature I H J 6 B. MEMory BUTTON • Press to toggle between current temperature, minimum and maximum. Readings include both the indoor and outdoor temperatures • Press & hold to clear memory C. MODE BUTTON • Toggles between the (5) clock modes -Month & Date, -Time with seconds, -Time with the day of the week, -Time with Zone and seconds, -Time with Zone and day of week D. ALARM BUTTON • Switches between 3 alarm modes • weekly, single alarm and pre-alarm modes E. UP ( ) BUTTON • Increments all function parameters • Enables any of the alarms F. DOWN ( ) BUTTON • Decrements all function parameters • Disables all available alarms • Enforces the remote sensor signal search G. SNOOZE BUTTON • Stops any alarm temporarily H. BATTERY COMPARTMENT • Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries. I. WALL-MOUNT RECESSED HOLE • Used to mount the main unit on the wall J. REMOVABLE TABLE STAND • Keeps unit in upright position on a flat surface 7 REMOTE SENSOR FEATURES • Remote temperature transmission to the main unit via 433 MHz signal • Case can be wall mounted using built-in hanger • 100 feet (30 meters) transmission range without . interference • Selection of the temperature display in Celsius or Fahrenheit • Channel selection 8 A. LED INDICATOR • Flashes once: in 40-60 second intervals when the remote sensor transmits a reading to the main unit. • Flashes twice: when battery power is low. B. BATTERY COMPARTMENT • Holds two AA-size batteries C. RESET • Resets all readings D. WALL-MOUNT RECESSED HOLE • Mounts the remote sensor on the wall E. °C/ °F SWITCH • Selects the temperature display in Celsius or Fahrenheit F. CHANNEL SWITCH • Selects the desired channel RESET °C/°FCHANNEL 1 2 3A THERMO – SENSOR C D F E B 9 BEFORE YOU BEGIN • The remote sensor can be placed indoors or outdoors, the main unit must be placed indoors. • We recommend using alkaline batteries for the remote sensor and main unit when temperatures are above 32°F (0°C). We recommend using AA lithium batteries for the remote sensor when temperatures are below 32°F (0°C). • Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements). • Insert batteries before first use, matching the polarity in the battery compartment. • ALWAYS install batteries in the remote sensor before the main unit. • Press RESET after each battery change with a paper clip or similar tool. • During an initial setup, place the main unit as close as possible to the remote sensor. • After reception is established (the remote temperature will appear on the main unit’s display), position the remote sensor and the main unit within the effective transmission range of 100 feet (30 meters). NOTE: 1. Avoid setting manually the time and date on the main unit before the remote temperature is displayed. 2. The effective operating range may be influenced by the surrounding building materials and how the receiver and transmitter are positioned. 3. Place the remote sensor so that it faces the main unit (receiver), minimizing obstructions such as doors, walls, and furniture. 4. Though the remote sensors are weather-resistant, they should be placed away from direct sunlight, rain or snow. 10 NOTE: Batteries in the outdoor remote sensors may have reduced voltage supply and a shorter effective range at temperatures below freezing. We recommend using lithium batteries below 32°F (0°C). BATTERY INSTALLATION REMOTE SENSOR NOTE: Install the batteries; select the channel and temperature in C° or F° before mounting the remote sensor. • Remove the screws from the battery compartment with a small Phillips screwdriver. • Select the desired channel. The switch is located in the battery compartment. Channel 1 is the default setting and typically selected if only one remote sensor is being used. • Install 2 “AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment. • Replace the battery compartment door and secure the sc...