Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
•Replace the battery at least once a year, even if the current battery is working properly. •The battery that comes with the clock loses some power during transport and storage. Operation Guide DQ-542/542B 2 Hour Minutes Press to toggle between 12-hour and 24-hour timekeeping. Press to advance the alarm time minute setting. Press to advance the alarm time hour setting. USING THEALARM The alarm sounds when the current time reaches the alarm time. The face illuminates for the first 5 seconds of the alarm operation as well. The alarm tone alternates between three levels. You can also use the Alarm Mode selector 6 to select the snooze alarm feature. Setting the Alarm Time 1. Slide the Mode switch 5 to “AL”. This causes the alarm time setting to flash on the display. 2. Use the 12 • 24/YEAR button 2, MIN/ DATE button 3, and HR/MONTH button 4 to set the alarm time. Holding down the MIN/DATE button 3 or HR/ MONTH button 4 changes the corresponding setting at high speed. •Make sure you set the correct am/pm time if you are using 12-hour timekeeping. The PM indicator indicates PM times, while nothing is indicated for AM times. 3. Slide the Mode switch 5 to “NORMAL”. This will cause the figures on the display to stop flashing. 4. Turning the Alarm On and Off Use the Alarm Mode selector 6 on the top of the clock to turn the alarm on and off, and to select the snooze feature. •The light also turns on for the first five seconds that the alarm sounds. Stopping the Alarm •When alarm is sounding, press the SNOOZE/LIGHT button 1 to stop it. When the snooze feature is turned on, the alarm will sound again in about five minutes. •To turn off the snooze feature, slide the Alarm Mode selector 6 to OFF. Testing the alarm •While the mode switch setting is “NORMAL”, hold down the HR/MONTH button 4 and MIN/DATE button 3 at the same time to sound the alarm. All of the display’s digital segments will appear at this time. Release the buttons to stop the alarm. Alarm Mode selector Description The alarm sounds at the preset time for one minute. You can stop the alarm by pressing the SNOOZE/LIGHT button 1. The snooze feature will cause the alarm to sound again about five minutes after it stops. A indicator flashes on the display during the period between alarms. •If you keep stopping the alarm manually by pressing the SNOOZE/LIGHT button 11111The alarm will sound again, about five minutes after you stop it. •If the alarm is not stopped manually The alarm will sound three times for one minute, at five-minute intervals. After that the snooze feature will be cancelled automatically. The alarm sounds at the preset time for one minute. The alarm does not sound. SNZ ON OFF USING THE LIGHT Hold down the SNOOZE/LIGHT button 1 to illuminate the display. The light will go out automatically after about three seconds, even if you keep the button depressed. Important! •Overuse of the light can shorten battery life. BATTERYREPLACEMENT Replace the battery whenever the display of the clock becomes dim and difficult to read. 1. Open the battery compartment cover as shown in the illustration. 2. Remove the old battery. 3. Load a new battery. Make sure that the positive (+) and negative (–) ends of the battery are facing correctly. An incorrectly loaded battery can burst and damage the clock. 4. Replace the battery compartment cover. Battery precautions •Keep batteries out of the reach of small children. If a ...
Эта инструкция также подходит к моделям:Регистраторы времени - DQ-542 (866.48 kb)