Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
FEATURES • Multi-language calendar: English/German/ French/Spanish • Manual time setting • Daily alarm with snooze • Indoor temperature (°C / °F selectable) • E.L. Backlight • mb/hPa or inHg selectable • 12 to 24 hour weather forecast • Daylight Saving Time (DST) • Moon phase display • Time zone display: Eastern, Central, Mountain & Pacific FUNCATION KEYS SNOOZE/LIGHT bar: TIME key: ALM SET key: UP key: DOWN key: °C/°F key : mb/hPa or inHg key: RESET key: ALARM ON/OF switch: PRODUCT DESCRIPTIONS 1. LCD display 2. UP key 3. TIME key 4. ALM SET key 5. DOWN key 6. °C/°F key 7. mb/hPa or inHg key 8. ALARM ON/OFF switch 9. SNOOZE/ LIGHT bar 10. RESET key 11. Battery compartment DISPLAY SYMBOLS LCD display 1. Weather forecast & moon phase display 2. Clock display 3. Year/ month & date/alarm time display 4. Daylight savings time indicator 5. Signal strength indicator 6. Time zone map 7. Second /day of the week display 8. Atmosphere pressure display 9. Temperature display NOTE: Seconds and Day of the Week Display: Automatically toggles every 30 seconds from Day to Seconds. Toggles back to Seconds after 92 seconds. INSTALLING OR REPLACING THE BATTERIES • Begin by opening the battery compartment cover at the back of the clock. • Insert 2 AAA batteries (not included) into the battery compartment and make sure the polarity is correct by following the (+ or -) symbols engraved inside. • Replace the battery whenever the display becomes dim or difficult to read. SELECT THE TIME ZONE ( WWVB VERSION ONLY) Make sure the time zone is already set to appropriate location. The default time zone is Pacific zone. If your location is not of Pacific zone, please press the UP key to set the desired Time zone. RADIO CONTROLLED TIME FEATURE After the first signal is received, the clock will automatically seeks the atomic clock signal that is transmitted by the National Institute of Standards and Technology in Fort Collins, Colorado. Delete all other words after “Colorado”. SIGNAL STRENGTH INDICATOR FOR RADIO CONTROLLED TIME SETTING The signal indicator displays signal strength in 3 levels. Wave segment flashing means time signals are being received. The signal quality is indicated: If the RC clock receives a successful signal, a sync-time symbol will appear on the LCD. Stop alarm sound and turn on E.L. backlight. Pressing and holding it for 8 seconds can stop the current RC reception. In normal time mode, press it once to toggle between month & date and year display. Keep it pressed for 2 seconds to enter time setting mode. In setting mode, press it to step the setting items. In normal time mode, press it to display Alarm time. In Alarm time mode, keep it pressed for 2 seconds to enter alarm time setting mode. In alarm time setting mode, press it to step the setting items. In setting mode, increase the setting value. For WWVB version, pressing UP key can set the desired Time Zone. In setting mode, decrease the setting value. In normal time mode, press it to toggle between 12 and 24hour format. Toggle between °C and °F format. Keep it pressed for 3 seconds to seek RC signal instantly. Toggle between mb/hPa and inHg display. In case of mal-function after insert of battery, use a pin to press the RESET key to restart the clock. In case of no display on LCD while inserting batteries, use a pin to press the RESET key to activate the clock. Switch alarm & snooze function on or off. 10 11 1 2345 6 7 8 9 1 2 3 4 5 6 8 9 7 ABOUT THE DAYLIGHT SAVINGS TIME (DST) This clock has been pre-programmed to automatically switch when daylight savings time is in effect. Your clock will show “DST” on the display during this time. NOTE: With the pre-programmed DST feature, if you live in an area where Daylight Savings Time is not observed, the time display on your clock will read +/- one hour during the DST time period. SETTING THE TIME MANUALLY To set the time, please follow these steps: • In normal time mode, press the TIME key for 2 seconds until the HOUR digit flashes. • Press UP or DOWN key to change the value of the flashing digit. • Press the TIME key again to step the setting items. The setting sequence will be: Hour > Minute > Second > Year > Month > Date > Day language. • Press the UP or DOWN key to select the day language: GB=English FR=French DE=German ES=Spanish IT=Italian • Press TIME key to exit the setting mode. NOTE: In normal time mode, pressing the DOWN key will toggle between the 12 and 24 hour formats. SETTING THE ALARM • In normal time mode, press ALM SET key to enter alarm time mode. • Press the ALM SET key for 2 seconds until the alarm hour digit flashes. • Press UP or DOWN key to increase or decrease the value of flashing digit. • Press ALM SET again to move through each setting. The sequence will be: Hour > Minute. NOTE: 12/24hour format of alarm time display are based on the normal time format. USING THE ALARM AND SNOOZE FUNCTION • To activate the alarm, slide the [ALARM ON/OFF] to the [ON] position, the bell indicator will appear ...