Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
Follow the steps below in order to make such adjustments. Ask your installer or network administrator for the IPA of the Main A and Main B CPUs. 1. Open the MPU955 Time Management Utility. Configure the CPU IP addresses. For first time operation, the Main CPU IP address will not be set. The administrator must enter the correct IPA for the system CPU(s). 2. Make sure Main A is displayed in the drop-down list. 3. Click the "IPA Setup” button in the toolbar. Tip: Double-click on the IP address displayed to open the IPA setup window as a shortcut. The Main A IP address setup window will appear. 4. Enter the correct IP address. 5. Click the green check mark to save, the red X to cancel. For redundant CPU 6. Choose Main B from the drop-down list. 7. Click the "IPA Setup” button in the toolbar. 8. Repeat steps 4 and 5 for Main B CPU. INSTALL MPU955 Time Management Utility 15 NSS Setup VERIFY CPU SETTINGS In order to view the settings that exist within the system CPU(s), the administrator must perform a “Get CPU Info”. This action will interrogate the system and return the current values for time, date and time zone of the desired CPU. Each time this button is used, time, date and time zone information is retrieved all at once, regardless of which tab section is selected. Follow the steps below for retrieving this information. Date/Time Properties 1. Make sure that the desired Main CPU (A or B) is displayed in the drop-down list. 2. If the Date/Time tab is not selected, click on the tab to bring the Date/Time adjustments window to the front. 3. Click on the "Get CPU Info” button. This will display the current date and time settings within the NSS system CPU selected. The gray circle in the calendar represents the current date within the selected CPU after performing the “GET”. Also, a camera icon will display on the right side of the CPU time window indicating a snapshot has been taken of the selected CPU when a “get” is performed. CPU Time 9 :04:35 AM CO Compare the Local settings with the CPU settings and determine if any adjustment should be made. 16 Panasonic meca tdc Install changing main CPU set Date/Time Quick Set To change the TMU Date/Time settings to match the PC, perform the following steps: 1. Verify the PC Date and Time settings. See Verify Local PC Settings section on page 13. 2. Click the "Set to Local PC Date/Time Settings” button. 3. Verify the Date and Time settings match the PC settings. 4. Proceed to transfer the settings to the system CPU(s), see "Transfer Settings” below. Manual To manually change the CPU date and time settings, perform the following steps: 1. Click the desired date on the calendar. The selected date will be highlighted in gray. 2. Click on the CPU Time clock hour. Set CPU Time 9:04:35 AM 050 3. Adjust by clicking the up or down arrows to advance the hour by increments of one. Tip: You may highlight a time section and type in the desired hour. 4. Adjust the minutes, seconds and AM/PM in the same manner. 5. Proceed to transfer the settings to the system CPU(s), see "Transfer Settings” below. INSTALL MPU955 Time Management Utility 17 Transfer Settings After the desired adjustments have been made to the TMU settings, it is necessary to transfer the settings to the system CPU(s). 1. Verify the settings displayed on the screen are correct. 2. Make sure that Main A (or Main B) is displayed in the drop-down list. 3. Click the "PUT CPU Info” button in the toolbar. 4. Check or uncheck the "Update Both CPUs” box. If your system includes two Main CPUs, it is recommended that this box be checked, to ensure that the CPUs are set to the same time. The CPUs may be set separately, if desired, by repeating this procedure for each CPU. If your system includes only one Main CPU, it is not necessary to check this box. 5. Click the "Send”. Verify the message in the bottom status bar reads “CPU Update Successful!” If this message does not appear, or an error message occurs, the transfer did not take place. Contact your service personnel. 6. Click the "Get CPU Info” button to verify the settings. 18 MPU955 Time Management Utility Uninstall Uninstall To uninstall the MPU955 Time Management Utility, Add/Remove Programs on Control Panel. use 19 Intentionally blank. 20 MPU955 Time Management Utility Glossary Glossary ACRONYMS CD - compact disk CPU - central processing unit, part of an NSS DST - daylight saving time IP - Internet protocol IPA - Internet protocol address MCPU - main central processing unit, part of the NSS specified as A or B NSS - network security system OSD - on-screen display PC - personal computer TCP/IP - transmission control protocol / Internet protocol TMU - MPU955 Time Management Utility MPU955 Time Management Utility 21 Glossary TERMS admin console - a PC-based Graphical User Interface (GUI) that facilitates the interaction between an NSS (Network Security System) and a system administrator....
Эта инструкция также подходит к моделям:Видеонаблюдение - WJMPU955 (158.96 kb)