Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• RJ45 to 9-pin (DB9) serial port adapter • USB interface with standard RS232 adapter • Employee Swipe Cards MINIMUM SYSTEM REQUIREMENTS • PC with a Pentium® class or faster processor • 128 megabytes of RAM • Either: 9-pin (DB9) serial port or USB port • 1 gigabyte of free space on the system’s hard drive • Windows® XP, 2000, NT or Vista • Printer (if hard copy reports are desired) NEEDTOPLACEANORDER? Forcableextensionsandothersupplies, callPyramidTechnologies,LLCat: (888)479-7264CUSTOMERSERVICEPHONENUMBER(888)479-7264 ©2009 Pyramid Technologies, LLC. All rights reserved. PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE INSTALLING THE SOFTWARE NOTE: Prior to installing the software, it is recommended that you disable all anti-virus and firewall software so it does not interfere with the installation. It can be turned back on immediately after the installation. PlacethePyramidTimeTraxSoftwareCDintoyourPC.ThesoftwarewillAUTORUN.Youwillthenseethebelowsetupscreens.Followtheonscreeninstructions. Click NEXT to continue Accept licensing agreement and click NEXT to continue Click NEXT to continue Enter a User Name and Organization (optional) and click NEXT to continue Click INSTALL to begin installation 1 PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE Wheninstallationiscomplete,clickFINISHandRestartyourcomputer. You are now finished installing the Pyramid TimeTrax software onto your PC. We highly recommend restarting your computer before you proceed. NOTE: Do not continue using the software until the terminal(s) is completely connected with all cables and power supply. CABLE INSTALLATION OPTION 1 OPTION 2 A B D DC B E F G 1472580369ENTERCLEAR Central PC TimeTrax Terminal (included) RJ45 to 9-pin (DB9) Adapter (included) AC Power Supply (included) USB to RS232 Adapter (included) Wall Power Outlet 7’ RJ45 Communication Cable (included) PARTS REFERENCE ABCD EFG TWO AVAILABLE OPTIONS FOR CONNECTING THE PYRAMID TIMETRAX SERIAL/USB TERMINAL TO YOUR CENTRAL PC OPTION 1: PC HAS an available open Serial 9-pin (COM) port. Connect the AC power supply (Fig. F) to a standard wall power outlet (Fig. G) and to the TimeTrax terminal (Fig. E). Connect the white RJ45 communication cable (Fig. D) to the RJ45/DB9 adapter (Fig. B). This will then connect to the back of your PC. (Fig. A) 2 PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE OPTION 2: PC DOES NOT HAVE an available open Serial 9-pin (COM) port -or-only equipped with a USB port. Connect the AC power supply (Fig. F) to a standard wall power outlet (Fig. G) and to the TimeTrax terminal (Fig. E). Connect the white RJ45 communication cable (Fig. D) to the RJ45/DB9 adapter (Fig. B) and then connect the RS232/USB adapter (Fig. C) to the back of your PC. (Fig. A) Please restart/reboot your PC before continuing with the instructions. CHARGING THE BATTERY Note: The TimeTrax Battery must be charged for 4 hours before first time use. Connect the AC Power to a 115-volt electrical outlet and the other end to the TimeTrax Mobile charge port. During the charging process, the charge light displays a constant green. Fully charged, the TimeTrax Mobile battery life is 50 hours. The Sleep Mode offers battery conservation by automatically shutting off after 15-minutes of non-use allowing longer periods between recharges. Pyramid recommends frequent recharging. When the TimeTrax Mobile is in Sleep Mode and an employee needs to swipe, the On/Off switch needs to be turned off and then back on to bring the unit back into ready mode. Sleep Mode does not move the switch to the OFF position but it shuts down the power as if it did. If the battery runs low, the TimeTrax display will indicate LOW BATTERY. If operation of the time recorder continues and the battery continues to drain, the display will flash CHARGE BATTERY and will shut off after 10 seconds of flashing. However, punches/data will not be lost. USING THE CAR CHARGER The Pyramid TimeTrax Mobile offers an Automotive Adapter/Car Charger (Pyramid Part Number 42180) as an optional accessory to charge your bat- tery on the go. Simply plug one end of the car charger into the TimeTrax Mobile charge port and the other end into the car’s 12-volt accessory power outlet/cigarette lighter for an instant charge. As with a 115-volt electrical outlet charge, Pyramid recommends frequent recharging. LOGGING INTO THE SOFTWARE FOR THE FIRST TIME Double click the Pyramid TimeTrax ICON placed on your desktop to begin 3 PYRAMID TIMETRAX MOBILE SERIAL QUICK START GUIDE LOGGING INTO THE SOFTWARE FOR THE FIRST TIME When the program is launched, you are presented with the LOGIN screen shown. The temporary User Name is “Admin” The temporary Password is “PTI”. PTI is case sensitive and must be entered as directed. Enter this information and click the LOGIN button in the center of the screen. If the recorder is connected correctly, the Initial Communication Form will appear with the message “Recorder Found”. If not, check your cable connections as per the installation d...