Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Your clock automatically updates to the current local time when you travel, and you can set it to automatically update for Daylight Savings Time. The clock’s display shows your home time, the local time (wherever you are currently located), time zone, temperature, and day of the week. snooze local time temperature / humidity MODE SET time zone ON/OFF UP home time Please read this user’s guide before installing, setting up and using your new product Depending on your location, you may or may not receive an atomic clock signal. If you install batteries and the signal strength indicator (E) does not appear, you are in an area that does not receive a signal from an atomic clock. See “in regions not receiving an atomic clock signal”. in regions receiving an atomic clock signal The sequence for setting your clock in a region receiving an atomic clock signal generator is: 1) automatic signal detection 2) select a city or time zone 3) set the home time automatic signal detection 1. After batteries are installed, the clock starts searching for an atomic clock signal and E flashes. 2. In about 10 minutes, one of the following abbreviations appears momentarily to indicate the atomic clock from which you are receiving a signal: Region Abbreviation USA US UK UK North Japan JP Europe EU South Japan JP 3. The local time, date, month and year are automatically set and briefly appear on the display. Notes: • During automatic signal detection, you cannot manually set the time. To override signal detection and manually set the time, hold down MODE, ON/OFF and SNOOZE until E stops flashing. • For best reception, keep the clock away from equipment that emits RF or microwave signals, such as TVs, radios, or microwaves. • You may need to position your clock near a window for best reception. • The most dependable and clear signal is received at night, between midnight and 4am local time. • The clock receives an atomic signal update every 24 hours and will update accordingly for your location. select a city or time zone There are 32 cities and four US time zones stored in your clock. Each city is represented by an abbreviated name, and it’s GMT (Greenwich Mean Time). GMT refers to that city or region’s time relative to the International Date Line. For example, Honolulu is ten hours behind (-10), and Tokyo is nine hours ahead (+9) of the International Date Line. 1. Press MODE three times. An abbreviation flashes. 2. Press UP to scroll until you see your home city. If your home city is not listed, select the city listed that is in your time zone. Abbrev GMT City HNL -10 Honolulu THR +3.5 Tehran ANC -9 Anchorage DXB +4 Dubai PST -8 Pacific (USA) KBL +4.5 Kabul MST -7 Mountain (US) KHL +5 Karachi CST -6 Central (USA) DEL +5.5 New Delhi EST -5 Eastern (USA) DAC +6 Dhaka CCS -4 Caracas RGN +6.5 Yangon RIO -3 Rio de Janeiro BKK +7 Bangkok Abbrev GMT City LON 0 London HKG +8 Hong Kong PAR +1 Paris PEK +8 Beijing AMS +1 Amsterdam TPE +8 Taipei FRA +1 Frankfurt TYO +9 Tokyo CAI +2 Cairo ADL +9.5 Adelaide JRS +2 Jerusalem SYD +10 Sydney JED +3 Jeddah NOU +11 Noumea MCW +3 Moscow WLG +12 Wellington 3. Press SET to confirm. The time, day, month, date and year are automatically set. set the home time 1. Press MODE four times. The time zone (GMT) digits flash. 2. Press UP to scroll until your home time zone (GMT) digits appear. For example, if you are from Texas, which is on CST, you will scroll until -6appears. 3. Press SET to confirm. in regions not receiving an atomic clock signal If your clock starts searching for a signal, you can disable it by holding down ON/OFF, SNOOZE, and MODE until E stops flashing.The sequence for setting your clock in regions not receiving an atomic clock signal is: 1) select a city or time zone 2) manually set the current time 3) set the home time select a city or time zone Follow steps 1-3 as if you were in an area receiving an atomic clock signal. manually set the current time 1. Hold down MODE until the hour digits flash. 2. Press UP to scroll through the hours. 3. Press SET to confirm the correct hour. The minute digits flash. 4. Press UP to scroll through the minutes. 5. Press SET to confirm the correct minutes. The second digits flash. 6. Press UP to reset the seconds to zero (00). 7. Press SET to confirm the seconds. 8. Press UP to toggle between 12 or 24 hour time format. 9. Press SET to confirm the time format. 10. Press MODE once to view the day, month, year and date information. 11. Hold down MODE until the year digits flash. 12. Press UP to scroll through the years. 13. Press SET to confirm the year. The month digits flash. 14. Press UP to scroll through the months. 15. Press SET to confirm the month. The date digits flash. 16. Press UP to scroll through the dates. 17. Press SET to confirm the date. Daylight Saving Time (DST) 1. When in time mode, press MODE three times. 2. Press ON/OFF to enable or disable DST. Your clock will automatically adjust to DST on the appropriate date. set t...