Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
parts. Non-slip footwear is recom-20. CHECK DAMAGED PARTS. mended. Wear a protective hair cov-Before further use of the tool, a ering to contain long hair. guard or other part that is dam 12. ALWAYS USE SAFETY GLASSES. aged should be carefully checked Also use a face or dust mask if cut-to determine that it will operate ting operation is dusty. Everyday properly and perform its intended eyeglasses only have impact resis-function. Check for alignment of tant lenses, they are NOT safety moving parts, binding of moving glasses. parts, breakage of parts, mount13. WEAR APPROVED HEARING ing, and any other conditions that PROTECTION. may affect its operation. A guard or other part that is damaged should 14. SECURE WORK. Use clamps or a be properly repaired or replaced. vise to hold work when practical. It is safer than using your hand and frees 21. NEVER LEAVE UNATTENDED both hands to operate tool. TOOL CONNECTED TO AIR. Disconnect the air hose and do not 15. DO NOT OVERREACH. Keep prop- leave tool until it is relieved of any er footing and balance at all times. built up pressure. 16. MAINTAIN TOOLS WITH CARE. 22. NEVER ALLOW UNTRAINED Keep tools lubricated and clean USERS TO USE THIS TOOL for best and safest performance. WHILE UNSUPERVISED. Follow instructions for lubricating and changing accessories. 23. IF YOU ARE UNSURE OF THE INTENDED OPERATION, STOP 17. REDUCE THE RISK OF USING THE TOOL. Seek formal UNINTENTIONAL SPRAYING. Do training or research books or maga not carry tool with hand on trigzines that specialize in pneumatic ger and always disconnect from air tools. when not in use. Model H8115/H8117 Spray Gun -5 Additional Safety Instructions for Spray Guns 1. READ THIS MANUAL. This manual 8. PROTECTIVE CLOTHING. Protect contains proper operating instruc-exposed skin from overspray by tions for this spray gun. wearing a protective suit or other approved garment. 2. READ MATERIAL LABELS and MATERIAL SAFETY DATA 9. INAPPROPRIATE USE. DO NOT SHEETS (MSDS). Read and know point or shoot spray gun directly all the instructions on the packag-at yourself or another person or ing label and the MSDS specific animals. Do not attempt to use the to the material you intend to apply spray gun for any other use than it before opening the package. This was intended. information could save your life. 10. STORAGE. Thoroughly clean and 3. RESPIRATORY PROTECTION. dry spray gun before storage. Store Always wear a NIOSH approved in an approved cabinet. respirator when spraying or working around finishing materials. 11. SOLVENTS. Always store solvents and shop towels soaked in solvent in approved containers. 4. FIRE EXTINGUISHERS. Always have a fully charged multi class 12. EYE PROTECTION. Wear eye pro- or class B fire extinguisher in the tection whenever spraying or clean- immediate area. ing. Solvents and chemicals can cause serious eye injury, which 5. FLAMMABLE MATERIAL. NEVER could lead to blindness. spray near open flame or where any spark could occur. 13. OPERATING PRESSURE. DO NOT exceed the recommended 6. FRESH AIR. Always provide adeinlet air pressure. Excessive pres quate exhaust to keep area free of sure could cause the spray gun to built up vapors, NEVER spray in an blow seals or cause other internal unventilated area. equipment damage. 7. DISCONNECT COMPRESSED 14. LOCAL LAWS. Consult local AIR. Always disconnect the spray authorities regarding exhaust and gun from compressed air before waste disposal requirements. cleaning, changing attachments or when performing maintenance of any kind on this tool. -6- Model H8115/H8117 Spray Gun Model H8115/H8117 Spray Gun -7- SECTION 2: INTRODUCTION If you have any comments regarding this manual, please write to us at the following address: Grizzly Industrial, Inc. C/O Technical Documentation P.O. Box 2069 Bellingham, WA 98227-2069 Email: manuals@grizzly.com Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (800) 438-5901 E-Mail: techsupport@grizzly.com Web Site: We are proud to offer the Grizzly Model H8115/H8117 Spray Gun, part of a growing Grizzly family of fine pneumatic tools. When used according to the guidelines set forth in this manual, you can expect years of trouble-free, enjoyable operation, and proof of Grizzly’s commitment to customer satisfaction. It is our pleasure to provide this manual with the Model H8115/H8117. It was written to encourage safety considerations and guide you through general operating procedures and maintenance. The specifications, details, and photographs in this manual represent the Model H8115/H8117 as supplied when the manual was prepared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly. Read the manual before operation. Become familiar wit...