Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions and replacement parts, please call 1-800-444-3353 Specifications Item Description Power Consumption Battery, 18 VDC, 1.7 Amp Hours Canister Capacity 15 oz. (500 ml) Battery Capacity 15 to 20 containers per full battery charge Battery Type 18 VDC, Ni-Cad, 1.7 AH Battery Charger Class II, 120 VAC, 60 Hz; Output: 24 VDC, 200 mA Delivery 10 oz. (300 ml) per minute (water) (maximum) Viscosity 30 DIN-sec (maximum) Stainless Steel Nozzles 2 – Round jet, 0.019” (dia.) 0.5 mm; For lighter body and sealer liquids 1 – Angle Nozzle Adapter, 0.023” (dia.) 0.6 mm; Slightly flexible; For latex, stain, and oil base paint Spray Functions 4 settings, adjustable Dimensions 10 (H) x 3-1/4 (W) inches; At canister 9-5/8 (L) inches; Side Handle: 4 (L) inches Weight 4.6 lbs. Accessories Blow mold case Viscosity cup with hanger Cleaning needle Nozzle Extension Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. General Safety Warnings and Precautions WARNING:When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before using this tool! 1. Keep work area clean. Cluttered areas invite injuries. 2. Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted. Do not use electrically powered tools in the presence of flammable gases or liquids. 3. Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords. 4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children. 5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended. 6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. SKU 90880 Page 2 7. Use eye, nose and mouth protection. Always wear ANSI approved impact safety goggles. Wear an ANSI approved dust mask or respirator when working chemical and paint dusts and mists. 8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running machines. 9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect power. Unplug Battery Charger when not in use. 11. Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before plugging Battery in. Do not carry any tool with your finger on the trigger. 12. Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired. 13. Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not turn On and Off properly. 14. Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 15. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool. 16. Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician. 17. Pacemaker safety warning. People with pacemakers should consult with their physician(s) before using thi...