Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Operating Instructions Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Detail Spray Gun Description A conventional siphon feed detail spray gun designed to spray all light to medium viscosity materials. It has fluid and pattern controls and is supplied with an 8 oz. material cup. The compact design makes this spray gun handy for detail, touch-up and small painting projects. Safety Guidelines This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols. Danger indicates ! DANGER an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Warning indicates ! WARNING a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Caution indicates a ! CAUTION potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. Notice indicates NOTICE important information, that if not followed, may cause damage to equipment. Unpacking After unpacking the product, inspect carefully for any damage that may have occurred during transit. Make sure to tighten fittings, bolts, etc., before putting unit into service. Do not operate! WARNING tool if damaged during shipping, handling or use. Damage could result in bursting and cause injury or property damage. Spray Gun Terms FEED – Method used to bring paint into the gun for spraying. PRESSURE FEED – Method of paint feed where a canister or paint tank is pressurized to force paint to the gun. Either internal or external mix air caps are used with this method. Pressure feed is generally used for spraying heavy bodied paints or for large size projects. SIPHON FEED – Method of paint feed where atmospheric pressure creates a partial vacuum to siphon paint to the gun. Only external mix air caps are used with this method. Siphon feed is used with light bodied paints. GRAVITY FEED – Method of paint feed similar to the siphon feed method. However, the cup is inverted to create a positive fluid pressure at the nozzle. MIX – The mixing of paint and air when spraying. INTERNAL MIX – Process where the air and paint are mixed inside the air cap just before being sprayed. This method is best for heavy bodied, slow drying paints and can only be used with the pressure feed method. Do not use fast drying paints with internal mix. The paint will dry inside and quickly clog the air cap. EXTERNAL MIX – Process where the air and paint are mixed just after leaving the nozzle. This type of mix should be used for fast drying paints and when a high quality finish is needed. BLEEDER/NON-BLEEDER – Indicates whether air flows through the gun continuously or as the trigger is pulled. BLEEDER – In this mode, air passes continuously through the gun whether spraying or not. This mode is generally used when the air is supplied by a continuously running compressor that does not have a tank. NON-BLEEDER – In this mode, air flows only when the trigger is pulled. This type of operation is used with a compressor equipped with a tank or with a large factory air system. VISCOSITY – A measurement of the resistance of the flow of a liquid. ATOMIZATION - Conversion of liquid to spray droplets (mist). PATTERN CONTROL KNOB – Used to form the proper pattern (size and shape) of paint as it is sprayed from the gun to the work piece. FLUID CONTROL KNOB – Used to control the amount of paint being mixed with air. PAINT TANK – An auxiliary pressurized paint reservoir that allows continuous spraying of large amounts of paint without stopping for refills as with a canister. It also allows using the spray gun at any angle or orientation. General Safety Information 1. Read all manuals included with this product carefully. Be thoroughly familiar with the controls and the proper use of the equipment. MANUAL REMINDER: Keep your dated proof © 2004 IN297700AV 2/04 Operating Instructions Instructions d’Utilisation Operating Instructions Manual de Instrucciones General Safety Information (Continued) 2. Follow all local electrical and safety codes as well as in the United States, the National Electrical Codes (NEC) and Occupational Safety and Health Act (OSHA). ! WARNING Use a face mask/respirator and protective clothing when spraying. Always spray in a well ventilated area to prevent health and fire hazards. Refer to Material Safety Data Sheets (MSDS) of spray material for details. ! DANGER Never spray closer than 25 feet to the compressor! If possible, locate compressor in separate room. Never spray into the compressor, compressor controls or the motor. 3. Do not smoke or eat when spraying pai...