This number must be between 01 and 20. 3. If the location is empty, skip to step 7. If a number is already stored in this location, it will be displayed at this time. 4. Press STORE. The display will show BEGIN CANCEL. 5. Use VOL+ VOL- to select BEGIN to enter a new number or CANCEL to exit without changing the number. 6. Press STORE. If CANCEL was selected, the phone display will return to idle. If BEGIN was selected, proceed to Step 7. 7. Dial the number to be stored, up to 31 digits. 8 Press

7. When the desired tone is selected, press MENU. Note that the page tone will not change until the handset is returned to the base. Key Tone This selects the sound that is made when a key is pressed. The choices are: OFF - No Tone, TONE - Each key makes the same tone, and MUSIC - Each key makes a different tone. 1. Press MENU. 2. Press CID/UP until PROFILE is displayed. 3. Press MENU. HS RINGER MUSICwill be displayed. 4. Press CID/DOWN until KEY TONE is displayed. 5. Press MENU. The current key

11:05 13-10 02/05AM MSG 01-03 OGM PLY UNAVAILABLE 16CALL # If the caller’s ID is unavailable (e.g. on NOTE: if you lift the handset of any phone connected to the an international call) ' UNAVAILABLE ' is shown; if the caller has withheld their same line as the Celestia 400, the machine will stop what it’s ID by dialling 1470, ‘ WITHHELD’ is shown. doing and free the line for you to speak to the caller. page 4 USING Message playback . Press the PLAY/PAUSE/STOP button If you have new messages have

3. Press and hold the memory button until the display shows “SAVE OK.” Dialing a number 1. Come off hook. 2. Press MEMORY 1, MEMORY 2, or MEMORY 3. The number will be dialed out. REDIAL BUTTON 1. To redial the last number dialed, come off hook and press REDIAL. 2. The selected number (32 digits maximum) will be redialed. To review dialed numbers. 1. While on hook, press REDIAL. 2. The display will show the last number dialed. 3. Use 5 or 6 to scroll through the list of dialed numbers. The last 1

All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. 91-5785-10-ATT5806-manual 5/25/04 3:5 k PM Page III J -e- Visit us at © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 3AT&T 06/04 91-5785-10-ATT5806-manual 5/25/04 3:51 k PM Page V ) CONTENTS BEFORE YOU BEGIN.......................

licensed to Advanced American Telephones. Net2Phone is a registered trademark of Net2Phone, Inc. © 2001 Advanced American Telephones. All rights reserved. Printed in China. Issue 1AT&T 7/01 INSTALLATION Before You Install 1 Choose a location for the base near an electrical outlet and a telephone jack. This phone requires a modular telephone jack and a standard electrical outlet (110v AC) not controlled by a wall switch. 2 3 Install the handset battery following Figure A below. Attach the belt cl

is shown on the display, and you cannot press any numbered key to send digits down the line. . Press once again to un-mute the mouthpiece You can store up to 40 numbers in each handset’s Phone Book (memory). Each number can have up to 20 digits, and you can store a name of up to eight characters with the number. To store a number The display shows: 1 Press MENU • phonebk 2 Press OK • add 3 Press OK • name? 4 Key in the name, using the numbered keys 5 Press OK • number? 6 Key in the number Note:

You will see >Copy to Phb. Press Menu/OK again. You can now edit the Name and Number. See the PHONEBOOK section for details on editing. Once you are satisfied with the Name and Number, press Menu/OK. You can now assign a Special Ring for this number. Use ^ or Ў to make your Special Ring selection, and then press Menu/OK. You will see >Save. Press Menu/OK again to confirm. Otherwise, use Ў to scroll down to >Go Back, and then press Menu/OK to return to the previous menu. When finished, press DEL/

TELEPHONE OPERATION Page/Handset Locator Page the handsets from the base by pressing L. The handsets will sound a repeating tone. Cancel the page by pressing any key on the handset, or wait 60 Indicates seconds. handset in use Indicates handset charging Temporary Tone Dialing If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call. 1 Make the call, and wait until it is connected. 2 Press Sthen #. Keys pressed after this send touch tone signals.

licensed to Advanced American Telephones. 6100_book_1ATT 11/25/00 12:37 PM Page iii 6100_book_1ATT 11/25/00 12:37 PM Page iii © 2000 Advanced American Telephones. All rights reserved. Printed in China. 150001840 Issue 1AT&T 12/00 6100_book_1ATT 11/25/00 12:37 PM Page 1 6100_book_1ATT 11/25/00 12:37 PM Page 1 INSTALLATION . . . . . . . . . . . . . . . . . . . .3 Before You Install . . . . . . . . . . .3 Table/Desk Installation . . . . . . 4 Wall Installation . . . . . . . . . . . .6 TELEPHONE OPE