Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Your Skip 100 is a telephone with the facility to store 13 telephone numbers. It can be used as a main telephone or as an extension telephone. Items supplied: • Base unit • Handset with coiled cord • Line cord • This user manual • Wall mount bracket/Desk stand Location of Buttons, Controls and Connectors USER MANUAL ™ skip 100 • • • Convenient Access to 13 Memories Cable Management Easy Wallmount 0 1 4 7 2 5 6 8 9 3 R M1 M2 M3 9 1 2 4 6 8 3 5 7 M1 M2 M3 0 8 7 6 1 5 2 3 4 9 10 11 12 1. Wall mount hook 2. Memo card 3. Memo button 4. Memories button M1, M2, M3 5. Dialling keypad 6. Store button 7. R button 8. Redial button 9. Ringer volume switch 10. Recall Switch TBR/ELR 11. Tone/Pulse switch 12. Recess for fixing the wall mount bracket 3. Take off the handset. 4. Pull out the wall mount hook and turn it 180 degrees and snap the wall mount hook back into place 5. Slide the bracket onto the nails 6. Hang back the set The telephone can also be used on desk 1. Drill 2 holes according to the dimension of the wall mounting bracket and place 2 nails into the wall 2. Insert the wall mount bracket into the recess as shown 8.5cm 5mm Connect the telephone line cord Connect the handset coiled cord. Installation Wall Mounting 7. 8. Setting the dialling mode Set the tone/pulse switch to "TONE" mode or "PULSE" depending on which dialling system is used in your exchange. If you are in doubt the dialling system used, set the telephone to the "TONE"-dialling mode and attempt to make a call. If the dialling-tone does not cease, then reset the telephone to "PULSE"-dialling mode. It should then be possible to make a call. Setting the ringer volume Adjust the ringer volume to Hi or low by setting the Ringer Hi/Low switch according to need. Setting recall mode Set the Recall mode switch to T (Flash recall) or E (Earth recall) according to the specification of your exchange. If in doubt, contact your network operator. 3140 025 20890 Making a call Make a call either by manual or memory Manual Dialling 0 ... 9 Dial the number Memory Dialling M1 M2 M3 To dial memories stored in M1...M3, Press M1...M3 0 ... 9 To dial memories stored, press memo key and the number Erasing memory M1 M2 M3 Press M1, M2, M3 9 0 Press store and the number Press the memo key and then the number Operation On this telephone there are the following features: The Last number redial feature The last number you dialled will be automatically stored in the redial memory. Press thefor the dialling tone. Lift the handset and wait button. The last number will be redialled automatically. Notes: The last number dialled will remain stored in the memory until another number has been dialled, allowing the Last Number Redial procedure to be repeated as many times as required. The telephone number can only be automatically redialled if it does not consist more than 32 digits. The Last Number Redial facility cannot be used if a another dialling tone is given before allowing further dialling, e.g. for international...
Эта инструкция также подходит к моделям:Радиотелефоны - TD9063Z/16 (245.84 kb)
Радиотелефоны - TD9063T/16 (245.84 kb)