Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 1.7 mb Название файла: Язык инструкции:

Your telephone has also benefited from the Philips EcoDesign program - Environmenta. Conscious Product Design - which considers the environmental impact of a product during it. entire life cycle. 2 3 INSTALLING YOUR TELEPHONE CHOOSING THE POSITION FOR THE BASE STATION To reduce any risks of interference, avoid placing the base station less than 1 metre from another electrical device (telephone, television, computer, etc.). The base station must be placed on a flat surface. Avoid placing the base station: - in a damp room, - near a heat source, - near obstacles like thick walls or metal structures. INSERTING / REPLACING THE BATTERIES Your handset is powered by 2 rechargeable AA/R6 batteries. If you need to replace them you should use PHILIPS RC NC-P or Saft RC6 batteries. 1 . Press the top of the battery cover and slide it downwards. 2 . Insert the batteries, taking care to respect the marked polarities. 3 . Close the cover. The batteries contain cadmium and should be disposed of in accordance with the regulations in force concerning the disposal of waste. Never use non-rechargeable batteries. The manufacturer disclaims all responsibility if these recommendations are not respected. CONNECTING THE TELEPHONE At the back of the base station: 1.Connect the mains adapter cable to the base station, then plug the mains adapter into the wall socket. 2.Connect the telephone cable to the base station and then to the wall socket. .Place the telephone handset on the base station and allow the batteries to charge for at least 12 hours. Only use the cables supplied with the product. FITTING THE COLOUR CLIP 1.Insert the clip from the top first. 2.Firmly press on the clips (in the arrow direction) until they lock. 3.To remove the colour clip, pull it out from the .Philips . marking. 1 2 Cd DESCRIPTIO. HANDSET DISPLA. NumericalcharactersTelephoneicons ICO. STAT. DESCRIPTIO. Displaye. Batteries charged. Batteries low. Blinkin. Handset being charged. Displaye. Programming activated. Blinkin. Waiting for an answer from the base station (in th. context of registration). Displaye. Memories in use (consultation, programming). Displaye. External call in progress. Blinkin. External call arriving. Displaye. Internal call in progress. Blinkin. Internal call arriving. Displaye. Handset in receiving mode (connected to the bas. station). Not displaye. Handset out of range of the base station. Base station not connected to power supply. Blinkin. Handset not registered with the base station. 4 DESCRIPTIO. TELEPHONE LED. The base station has a green LED. . Lit, when the base station is powered. . Blinking, when. . receiving a call. . the line is connected or the answering machine is replying. . Unlit, when the base station is not connected to the power supply. AUDIBLE SIGNAL. Your telephon. emits. . 1 short bee. . when you press a key. . 1 long bee. . when these is no contact between the handset and the base station. any other problem occurs (if you make a mistake). . to indicate...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: