Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
> Desactivate firewall (software / hardware) before installation. Do not forget to reactivate it after the installation. > If you have installed an old version IP Phone Center, we suggest that you uninstall it before you install your USB adapter. > During installation follow detailed descriptions on the screen. > Voice quality may depend on the quality of your Internet connection dial up or broadband. > Voice quality may vary over time. > Internet connection behind firewalls may not be supported, depending on the IP softphone capabilities. > One softphone only must be active at a given time. To avoid any conflicts in the use of the adapter, disable the other softphones than the one in use. > Use of other softphone than Skype will impact installation & use of this product. Safety precautions for the USB adapter > Only use the USB extension cable supplied. > Do not connect or disconnect the USB adapter during a storm. This brings a risk of electric shock. Important information EN Minimum PC requireme nts Hardware > IBM or 100% compatible PC , 400 MHz processor > 128 MB RAM main memory > 30 MB or more free hard disk memory > 1 free USB port (USB1 or USB2 compatible) > 1 CD-ROM drive or 1 DVD drive Software > Operating system : Windows 2000 and Windows XP > 33,6 kbps or faster connection to the Internet. Broadband connection recommended (from 256 kbit/s downlink, 128 kbit/s uplink) Trademarks > Windows 2000 and Windows XP are registered trademarks of the Microsoft Corporation. > Skype is a registered trademark of Skype Technologies SA. Need help ? More tr oubleshooting and FAQ.s : Online help: Tr oubleshooting : page 15 EN What.s in the box USB adapter USB cable Line telephone cable RJ11-RJ11 VOIP021 voice over IP telephone adapter Installation CD PHIPC compatible Version 1.00 User manual Bedienungsanleitung 15 Mode d’emploi Bruksanvisning 43 1 29 Installation IP Pho ne Center User manual Your telephone adapter EN EN Install Installation of Skype software Download Skype software 1 Switch on your PC 2 Launch internet connection Go to to download latest version of Skype software WARNING Download time is linked to your speed connection Install Skype software Follow instructions displayed on your screen Installation involves various steps in whichyou can select a number of options. Aftereach step confirm your selection withContinue/Next to continue with the installation procedure. Use Back to return to your previous selection 1 Create your Skype account 2 Complete your new user profile > Skype will send a confirmation email to the mail address declared in your profile. Install Install EN Create contacts in Skype 1 Press + to add a cont act 2 Enter Skype name of your relation and follow instructions 3 Go in tab Contacts, press mouse right key and select Assign Speed-Dial 4 Assign a number between 0 to 99 for this new contact to directly call from your telephone This number will be the speed dial key of your contact Repeat these 4 steps for each new contact. EN Connect Install the adapter WARNING Do not connect adapterbefore CD-ROM installation is completed. Load CD Rom Close all th e progr ams (except Internet navigator) running on your PC 1 Insert the installation CD in your PC.s CD-ROM drive. > The setup Wizard software is started automatically If the Setup Wizard software does not startautomatically : > Open Windows Explorer > Select the CD-ROM drive > Double-click Autorun.exe Installation involves various steps in whichyou can select a number of options. Aftereach step confirm your selection withContinue/Next to continue with the installation procedure. Use Back to return to your previous selection 2 Follow instructions displayed on your screen 3 Reboot system once installation finished 4 After PC reboot, select your Skype name from the choice list Connect EN Connect USB device 1 Connect the supplied USB cable on the back of the adapter and on your PC USB port 2 Follow the hardware recognition instructions When you connect the VOIP021 USB adapter, hardware recognition is started Confirm the preset options with < Back or Next > WARNING If dialog boxes appearduring installation informing you about amissing Windows Logo test, click on Continue Anyway to continue the installation 3 Click on Finish > Red icon in the status bar Enter your serial number and your personal information 1 Double-click on the IP phone center icon on desktop 2 Find serial number printed on CD Rom sleeve 3 Enter your mandatory personal data : first name, last name, email address, country. These datas are written in the VOIP adapter. In case of reinstallation, you must enter thedatas again. EN Connect WARNING Close any softphonealready running to complete the installation > You are invited to Restart the IP phone center Finalize y our connection 1 Right click on the red phone icon in the status bar to close it 2 Click on short cut of the desktop to start IP phone center If Skype is open, r ight click on the Sk...