Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Warning • Check the batter y polarity when inser ting in the battery compar tment. Incorrect polarity may damage the product. The batteries are pre-installed in the handset. Pull the batter y tape off from the batter y door before charging. Set the date and time Tip • To set the date and time later, press [Back] to skip this setting. 1 Select [Menu] > [Phone setup] > [Date & time], then press [OK] to confirm. 2 Press the numeric buttons to enter the date, then press [OK] to confirm. » The time setting menu is displayed on the handset. 3 Press the numeric buttons to enter the time. Note • If the time is in 12-hour format, press / to select [AM] or [PM]. 4 Press [OK] to confirm. Charge the handset Place the handset on the charging cradle to charge the handset. When the handset is placed correctly on the charging cradle, your hear a docking sound. » The handset star ts charging. Note • Charge the batteries for 8 hour s before fir st use. • If the handset becomes warm when the batteries are being charged, it is normal. Your phone is now ready to use. English EN 9 Check the battery level The batter y icon displays the current batter y level. When the handset is off the base station/charger, the bars indicate the batter y level (full, medium and low). When the handset is on the base station/charger, the bars flash until charging completes. The empty batter y icon flashes. The batter y is low and needs recharging. The handset turns off if the batteries are empty. If you are on the phone, you hear warning tones when the batteries are almost empty.The call gets disconnected after the warning. What is standby mode? Your phone is in standby mode when it is idle. The standby screen displays the handset name and number/date and time, signal icon, and batter y icon. Check the signal strength It displays the link status between the handset and base station. The more bars are shown, the better the connection is. • Ensure the handset is linked to the base station before you make or receive calls and carry out the phone functions and features. • If you hear warning tones when you are on the phone, the handset is almost out of batter y or the handset is out of range. Charge the battery or move the handset nearer to the base station. Switch your handset On/Off • Press and hold to switch off the handset. The screen of handset turns off. Note • When the handset is switched off, no call can be received. • Press and hold to switch on the handset. It takes a few seconds for the handset to power up. 10 EN 4 Calls Note • When the power fails, the phone cannot access emergency ser vices. Tip • Check the signal strength before you make a call or when you are in a call. For more information, see “Check the signal strength” in the Get star ted section. Make a call You can make a call in these ways: • Quick call • Dial before you call • Redial the most recent number • Call from the redial list. • Call from the phonebook list • Call from the call log Quick call 1 Press / . 2 Dial the phone number. » The number is dialed out. » The duration of your current call is displayed. Dial before you call 1 Dial the phone number • To erase a digit, press [Clear]. • To enter a pause, press and hold . 2 Press / to dial out the call. Call from the redial list You can make a call from the redial list. Tip • For more information, see “Redial a call” in the Redial list section. Call from the phonebook You can make a call from the phonebook list. Tip • For more information, see “Call from the phonebook ” in the Phonebook section. Call from the call log You can return a call from the received or missed call log. Tip • For more information, see “Return a call” in the Call log section. Note • The call timer displays the talk time of your current call. Note • If you hear warning tones, the handset is almost out of batter y or the handset is out of range. Charge the batter y or move the handset nearer to the base station. End a call You can end a call in these ways: • Press ; or • Place the handset to the base station or charging cradle. English EN 11 Answer a call When the phone rings, press / to answer the call. Warning • When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage. Note • The caller ID ser vice is available if you have registered to the caller ID ser vice with your ser vice provider. Tip • When there is a missed call, the handset displays a notification message. Turn off the ringer for all incoming calls When the phone rings, press . Adjust the earpiece volume Press / to adjust the volume during a call. » The earpiece volume is adjusted and the phone is back to the call screen. Mute the microphone 1 Press during a call. » The handset displays [Mute on]. » The caller cannot hear you, but you can still hear his voice. 2 Press again to unmute the microphone. » You can now communicate with the caller. Turn the speaker on or off Press . Make a second call Note • This service is network dependen...
Эта инструкция также подходит к моделям:Радиотелефоны - CD2850W/DE (625.26 kb)