Оценок - 0, средний балл: 0 ( )

Производитель: Philips Размер: 2.6 mb Название файла: Язык инструкции:

Warning • When the handset rings or when the handsfree is activated, keep the handset away from your ear to avoid ear damage. Note • The caller ID ser vice is available if you have registered to the caller ID ser vice with your ser vice provider. Tip • When there is a missed call, the handset displays a notification message. Turn off the ringer for all incoming calls There are two ways to turn off the ringer: 1 Press and hold in standby mode. » displays on the screen. 2 When the phone rings, press [SILENT]. Adjust the earpiece volume Press or to adjust the volume during a call. » The earpiece volume is adjusted and the phone is back to the call screen. Mute the microphone 1 Press during a call. » The handset displays [MUTE ON]. » The caller cannot hear you, but you can still hear his voice. 2 Press again to unmute the microphone. » You can now communicate with the caller. Turn the speaker on or off Press . Make a second call Note • This service is network dependent. 1 Press during a call, then press [OK]. » The first call is put on hold. 2 Dial the second number. » The number displayed on the screen is dialed out. Answer a second call Note • This is a country dependent setting. When there is a periodical beep to notify you of an incoming call, you can answer the call in these ways: 1 Press and to answer the call. » The first call is put on hold, and you are now connected to the second call. 2 Press and to end the current call and answer the first call. English EN 17 Toggle between two calls You can toggle your calls in these ways: 1 Press and ; or 2 Press [OK] and select [SWITCH CALLS], then press [OK] again to confirm. » The current call is put on hold, and you are now connected to the other call. Make a conference call Note • This ser vice is network dependent. Check with the service provider for additional charges. When you are connected to two calls, press [OK], select [CONFERENCE] and then press[SELECT] again to confirm. » The two calls are combined and a conference call is established. 18 EN 5 Intercom and conference calls An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation among you, another handset user and the outside callers. Make a call to another handset Note • If the base station only has 2 registered handsets, press int to make a call to another handset. 1 Press int. The handsets available for intercom are displayed. 2 Select or enter a handset number, then press [SELECT] to confirm. » The selected handset rings. 3 Press on the selected handset. » The intercom is established. 4 Press to cancel or end the intercom call. Note • If the selected handset is occupied in a call, you hear a busy tone. While you are on the phone You can go from one handset to another during a call: 1 Press int. » The current caller is put on hold. 2 Select or enter a handset number, then press [SELECT] to confirm. » Wait for the other side to answer your call. Toggle between calls Press int to switch between the outside call and the intercom call. Transfer a call 1 Press int during a call. 2 Select or enter the handset number, then press [SELECT] to confirm. 3 Press when the other side answers your call. » The call is now transferred to the selected handset. Make a conference call A 3-way conference call is a call between you, another handset user and the outside callers. It requires two handsets to share the same base station. During an external call1 Press int to initiate an internal call. » The handsets available for intercom are displayed. » The external caller is put on hold. 2 Select or enter a handset number, then press [SELECT] to confirm. » The selected handset rings. 3 Press on the selected handset. » The intercom is established. 4 Press and hold int on your handset. » You are now on a 3-way conference call with the external call and the selected handset. 5 Press to end the conference call. English EN 19 Note • Press to join an ongoing conference with another handset if [ADVANCED SET] > [CONFERENCE] is set to [ON]. During the conference call1 Press int to put the ex ternal call on hold and go back to the internal call. » The external call is put on hold. 2 Press int to toggle between the ex ternal and internal call. 3 Press and hold int to establish the conference call again. Note • If a handset hangs up during the conference call, the other handset remains connected to the ex ternal call. 20 EN 6 Text and numbers You can enter text and numbers for handset name, phonebook records, and other menu items. Enter text and numbers 1 Press once or several times on the alphanumeric key to enter the selected character. 2 Press [CLE AR] to delete the ...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: