Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Simply make a call to your phone with a touch tone phone and enter your 4-digit PIN code. Note • The remote access PIN code is the same as your system PIN. The preset PIN is 0000. Change the PIN code 1 Press MENU. 2 Select [ANSW MACHINE] > [SETTINGS] > [REMOTE ACC.] > [CHANGE PIN], then press OK to confirm. 3 Enter the old PIN, then press OK to confirm. 4 Enter the new PIN code, then press OK to confirm. 5 Enter the new PIN code again, then press OK to confirm. » The setting is saved. 2 Select [ANSW MACHINE] > [SETTINGS] > [REMOTE ACC.], then press OK to confirm. 3 Select a new setting, then press OK to confirm. » The setting is saved. Access the answering machine remotely1 Make a call to your home number with a touch tone phone. 2 Enter # when you hear the announcement. 3 Enter your PIN code. » You now have access to your answering machine, and you can now listen to the new messages. Note • You have 2 chances to enter the correct PIN code before your phone hangs up. 4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions. Note • When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds. 34 EN Remote access commands Key Function 1 Repeat the current or listen to the previous message. 2 Listen to messages. 3 Skip to the nex t message. 6 Delete the current message. 7 Switch the answering machine on. (not available when you listen to the messages). 8 Stop listening to the message. 9 Switch the answering machine off. (not available when you listen to the messages). Call screening You can hear the caller while he is leaving a message. Press to pick up the call. From the base Press / to adjust the speaker volume during call screening. The lowest volume level turns off the call screening. Behavior of the LED key on the base station The table below shows you the current status with different LED key behavior on the base station. Answering Message status LED key on the machine base station status Off -Off On No new message On On New message Flashing On Message full Flashing quickly On Recording Flashing incoming message On Registration Flashing mode English EN 35 15 Default settings Language* Country dependent Handset name PHILIPS Date 01/01/10 Date format* DD/MM Time 00:00am Time format* 24-hour Alarm Off Phonebook list Unchanged Recall time* Country dependent First ring* Country dependent Dial mode* Tone Area code* Empty Carrier code* Empty Handset ring melody Melody 1 Alarm tone Melody 1 Receiver volume Volume 3 Handset ring volume Level 3 Handset key beep On XHD sound On Incoming call log Empty Redial list [NO NUMBER] PIN code 0000 Answering Machine Ans machine status On Ans machine mode Ans & Rec Base call screening On Announcement Pre-recorded memory announcement Incoming message Empty memory Remote access Off Ring delay 5 rings Speaker volume Level 3 Note • *Countr y dependent features 36 EN 16 Technical data Display • Amber LCD backlight General telephone features • Caller name & number identification • Conference call and voicemails • Intercom • Maximum talk time: 12 hours Phonebook list, Redial list and Call log • Phonebook list with 50 entries • Redial list with 5 entries • Call log with 10 entries Battery • GP Batteries: PH50AAAHC size AAA NiMH 1.2V 500mAh • BYD Company Limited: H-A AA500A-Z size AA A NiMH 1.2V 500mAh Adapter Base and charger : • Salom Electric (Xiamen) Co., Ltd. : SSW1920: Input: 100-240V 50/60Hz 200mA; Output: DC6V 500mA • Salcomp (Shenzhen) Co., Ltd.: V T0300: Input: 100-240V 50/60Hz 150mA Output: DC6V 500mA Power consumption • Power consumption at standby mode: 0.6W (SE170); 0.65W (SE175) Weight and dimensions (SE170) • Handset: 111.6 grams • 162 x 29.15 x 46.1 mm (H x D x W) • Base: 111 grams • 104.3 x 75.9 x 111.9 mm (H x D x W) • Charger: 59.1 grams • 96.25 x 67 x 80.3 mm (H x D x W) Weight and dimensions (SE175) • Handset: 111.6 grams • 162 x 29.15 x 46.1 mm (H x D x W) • Base: 137.8 grams • 104.3 x 75.9 x 111.9 mm (H x D x W ) • Charger: 59.1 grams • 96.25 x 67 x 80.3 mm (H x D x W ) Temperature range • Operation: 0°C to +35°C (32°F to 95°F) • Storage: -20°C to +45°C (-4°F to 113°F) Relative humidity • Operation: Up to 95% at 40°C • Storage: Up to 95% at 40°C English EN 37 17 Frequently asked questions No signal bar displays on the screen. • The handset is out of range. Move it closer to the base station. • If the handset displays [UNREGISTERED], register the handset. Tip • For more information, see “Register the handsets” on the Advanced settings section. If I fail to register the additional handsets to the base station, what do I do? Your base memor y is full. Unregister the unused handsets and tr y again. No dialing tone • Check your phone connections. • The handset is out of range. Move it closer to the base station. No docking tone • The handset is not placed properly on the base station/charger. • The docking tone setting is off. • The charging contacts are dir ty. Disconnect th...
Эта инструкция также подходит к моделям:Радиотелефоны - SE1751B/38 (1.97 mb)
Радиотелефоны - SE1701B/38 (1.97 mb)
Радиотелефоны - SE1752B/38 (1.97 mb)
Радиотелефоны - SE1702B/23 (1.97 mb)