Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации BT, модель SPEAKEASY COMBO 2005 TWIN

Производитель: BT
Размер: 1.52 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


When the alarm time is reached, the and “ALARM ON” flash on the handset display and the alarm melody plays for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. Note: a. A key press will still disable the alarm even if the handset keypad is locked when the alarm rings. b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level. c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the and “ALARM ON” will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once the user presses any key or presses and holds to disable the alarm, it will revert to the call duration screen. d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of the snooze period. 8.2.1 Turn on/off the Alarm 1. Press

and to select HS SETTINGS. 2. Press to show ALARM. 3. Press and to select ON/OFF. 4. Press to confirm. Note: If ON is selected, you will be asked to set the alarm time. 26 . 8.2.2 Set the Alarm Time (if the Alarm is set to be ON) 1. Follow Steps 1 to 4 in Section 8.2.1. 2. Enter the alarm time. 3. Press to show SNOOZE. 4. Press and to select snooze ON or OFF. 5. Press to confirm. 8.3 Handset Settings 8.3.1 Ringer Setup 8.3.1.1 Set the Ringer Melody for Internal Calls 1. Press and to select HS SETTINGS. 2. Press and to select RING SETUP. 3. Press and to select INT RING. 4. Press and to select the melody you wantto hear for internal calls. Note: The respective ringer melody will be played while browsing the melody list. 5. Press to confirm. 8.3.1.2 Set the Ringer Melody for External Calls 1. Press and to select HS SETTINGS. 2. Press and to select RING SETUP. 3. Press and to select EXT RING. 4. Press and to select the melody you want to hear for external calls. Note: The respective ringer melody will be played while browsing the melody list. 5. Press to confirm. 8.3.1.3 Set the Ringer Volume 1. Press and to select HS SETTINGS. 2. Press and to select RING SETUP. 3. Press and to select RING VOLUME. 4. Press and to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF). Note: The respective ringer volume will be played during your selection. If VOLUME OFF is selected, the icon will display. 5. Press to confirm. 27 . 8.3.2 Set Alert Tones Three different alert tones are set on by default, but can be turned off, ifdesired. Key Tone - a single beep is emitted when you press a key. Battery Tone - warning tones are emitted if the battery is low while you are talking on the phone, to alert you that you need to charge the handset batteries. Out Of Range - warning tones are emitted while you are talking on the phone, to alert you to move closer to the base unit, before the call is lost. 1. Press and to select HS SETTINGS. 2. Press Эта инструкция также подходит к моделям:
Радиотелефоны - SPEAKEASY COMBO 2005 TWIN (1.52 mb)
Радиотелефоны - SPEAKEASY COMBO 2005 TRIPLE (1.52 mb)
Радиотелефоны - SPEAKEASY COMBO 2005 TRIPLE (1.52 mb)
Радиотелефоны - SPEAKEASY COMBO 2005 TRIPLE (1.52 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории